Loading ...
Loading ...
Loading ...
6
IMPORTANT: As this kettle is fitted with a concealed element it
must be descaled regularly. The frequency of descaling depends on
usage and the hardness of the water in your area.
Excessive scale can cause the kettle to switch off before boiling
and may damage the element invalidating the warranty.
It is essential that regular descaling takes place.
Remove hard scale using a proprietary descaling product suitable
for stainless steel kettles.
Alternatively use citric acid crystals (available from most
pharmacies) as follows.
DESCALING
1. Open the lid.
2. Lift the filter upwards from its holder.
3. To refit the filter, slide it into the side wall guides of the filter
holder until it clicks into place.
WARNING: Unless the filter is fitted correctly, the kettle lid may
not close and lock securely.
FILTER REMOVAL
There is a switch on the cordless base of the product that can
switch the whistle on and off as desired. Refer to page 2.
WHISTLE FEATURE
7. Lift the kettle from the base unit by the handle ensuring you hold
the kettle level. To re-boil, switch ON again. If the kettle has just
switched off wait a minute or two before switching it back on
again. If you do not put in enough water, or switch on the kettle
when it is empty, the safety cut-out will switch off the power
automatically. If this happens, refill and wait a few minutes for the
element to cool, then use as normal.
Loading ...
Loading ...