Loading ...
Loading ...
Loading ...
The door stays locked. The drum
turns regularly to reduce creasing.
You must drain the water to unlock
the door.
Touch Start / Pause button : the
appliance performs the spinning
phase and drains the water.
• Activate the Quiet option.
All spinning phases (intermediate spin
and final spin) are suppressed and
the programme ends with water in the
drum. This helps to reduce creasing.
As the programme is very quiet, it is
suitable for use at night time when
cheaper electricity tariffs are
available. In some programmes the
rinses are performed with more water.
The display shows the indicator .
The door stays locked. The drum
turns regularly to reduce creasing.
You must drain the water to unlock
the door.
Touch the Start / Pause button: the
appliance performs only the draining
phase.
• No Spin .
Set this option to deactivate all spin
phases. The display shows the
indicator
. The appliance
performs the only draining phase of
the selected washing programme. Set
this option for very delicate fabrics.
The rinses phase uses more water for
some washing programmes
The appliance empties the
water out automatically after
approximately 18 hours.
7.9 Stains/Prewash
Press this button repeatedly to activate
one of the two options.
The relevant indicator goes on in the
display.
• Stains
Select this option to add an anti-stain
phase to a programme in order to
treat heavily soiled or stained laundry
with stain remover.
Pour the stain remover into
compartment . The stain remover
will be added in the appropriate phase
of the washing programme.
This option is not
available with a
temperature lower than
40 °C.
• Prewash
Use this option to add a pre-wash
phase at 30 °C before the washing
phase.
This option is recommended for
heavily soiled laundry, especially if
containing sand, dust , mud and other
solid particles.
The options can increase the
programme duration.
These two options cannot be
set together.
7.10 WASH mode
When the appliance is switched on, the
led of this button lights on to indicate that
a washing cycle will be performed.
If you press this button when
drying or steam mode are
active, the cycle returns to
wash only mode. In this way
you can cancel drying and
steam mode during set up,
or the drying mode if you
pause the cycle before the
drying phase starts.
7.11 DRY mode
Press this button once to add a drying
phase at the end of washing phase. Both
WASH and DRY leds light on.
Press this button twice to perform a
drying phase only. Only the DRY is on.
To return to wash only
mode, press the WASH
during set up or when you
pause the cycle before the
drying phase starts.
7.12 Time Dry
In the programme where it is selectable,
touch this button to set the time that suits
ENGLISH 19
Loading ...
Loading ...
Loading ...