Loading ...
Loading ...
Loading ...
(3) Input Block:
You can block the input source by this function, for example, if you want to blockAV input, just highlight 2
[AV] and push the [ENTER] button, TheAV input will not be seen in the screen.
(4) Change Password:
At the first time, you can use the default password. If you want to change it. This function will be needed.
First enter the new password then enter the same password again. Youwill get the new password.
(5) Clean All
This function will let you clean all the channels remembered in this TV.
Note: if you choose this function, all the program you preset will be lost.
TV Settings
1.Press MENU. The OSD opens.
2.Press Act,v- to highlight TV, then press i_
to enter the TV menu.
3.Press ,=orvhighlight an option, then press4
or _,to adjust the option. You can
adjust:
,O Tuner Mode=Select the TV signal source. You can selectAntenna or Cable.
_, Channel Scan-Scans for channels that have signals and stores the channels information
in memory. When you press_or'_,your TV skips any channels that do not have a signal.
4, ChanneI Skip= Deletes a channel stored in memory. Whenyou press-,,orv, your TV skips
the channel you deleted. You can still tune to the channel using the number buttons on the
remote control.
• ' MTS-Selects the sound mode. You can select Mono, Stereo, or SAP(second audio
program) Audio Language=Selects the audio language for a program.
Appendix
Cleaning and Care
WARNING: Do not try to remove the cabinet back. Refer servicing to qualified service technicians.
To clean the TV screen:
1) Unplug the TV to avoid possible shock hazard.
2) Use a clean cellulose sponge or chamois cloth dampened with a solution of mild detergent and warm water
to clean the TV screen and trim. Do not use too much water as water spilled into the cabinet can cause
damage to the TV.
3) Wipe off any excess moisture with a clean dry cloth.
4) Polish the cabinet with a quality furniture polish to maintain the finish and appearance of the cabinet.
Caution: Never use strong solvents such as thinner, benzene, or other chemicals on or near the cabinet.
These chemicals can damage the finish of the cabinet.
-17-
Loading ...
Loading ...