Lorell LLR99843 LED Digital Heater, Electric, Electric, 900 W to 1500 W, 2 x Heat Settings, 1500 W, Portable

Owner's Manual - Page 5

For LLR99843.

PDF File Manual, 21 pages, Read Online | Download pdf file

LLR99843 photo
Loading ...
Loading ...
Loading ...
When the timer indicator is lit, pressing the POWER button will cancel the timer setting.
Oscillation function
In order to set the heater to oscillate, the heater must be on (High, Low or Fan). Press the OSC
button once to activate the oscillating function and press the OSC button one more time to
disable oscillating function.
RESET INSTRUCTIONS
zThis heater is equipped with an internal High Limit Switch which causes the unit to stop
operating in the event the internal temperature exceeds normal operating temperatures.
IF THE UNIT SHUTS DOWN
1) TURN THE UNIT OFF
2) UNPLUG UNIT WAIT 10 MINUTES
3) PLUG IN AND TURN ON
IF YOUR HEATER FAILS TO OPERATE
zBe sure it is plugged in and that the electrical outlet is working.
zCheck for any obstruction. If you find an obstruction turn the heater OFF. Unplug the heater
and wait at least ten minutes for it to cool. Carefully remove the obstruction. Plug the heater
back in and restart it as described under OPERATION.
zIf you still notice the same defect above mentioned, remove the plug from the socket and
have the appliance serviced by authorized service personnel only.
zCheck that the setting temperature is not set lower than the current room temperature. Set
the desired temperature higher than the current temperature to restart the heater.
TROUBLESHOOTING
If your heater fails to operate, please follow these instructions:
Ensure that your circuit breaker or fuse is working properly.
Be sure the heater is plugged in and that the electrical outlet is working properly.
Check for any obstruction. If you find any obstruction, turn the heater off. Unplug
the heater and wait a few minutes for it to cool down. Carefully remove the
obstruction. Plug the heater in and turn it on again by referring to the OPERATING
INSTRUCTIONS.
NOTE: IF YOU EXPERIENCE A PROBLEM WITH YOUR HEATER, PLEASE SEE THE
WARRANTY INFORMATION FOR INSTRUCTIONS. PLEASE DO NOT ATTEMPT TO
OPEN OR REPAIR THE HEATER YOURSELF. DOING SO MAY VOID THE WARRANTY
AND COULD CAUSE DAMAGE OR PERSONAL INJURY. IF THE PROBLEM STILL
PERSISTS, PLEASE CONTACT US BY REFERRING TO THE SERVICE & SUPPORT
INFORMATION ON THE FOLLOWING PAGE.
Cancelling the timer setting
Loading ...
Loading ...
Loading ...