Loading ...
Loading ...
Loading ...
7
INSTALLATION
INSTALLATION INSTRUCTIONS
CAUTION!
Wear gloves to protect against sharp edge.
Installing the Range Hood
• For installing under the cabinet with recessed
bottom, attach a 4" wide wood filler strip (not
provided) on each side.
• Use a stud finder to locate and mark 2 studs inside
the wall.
• Make 2 cutouts on the top and bottom of the
cabinet that align with the outlet of the top vent
on the Hood. The diameter of the cutout should be
slightly larger than the diameter of the duct.
The following steps requires 2 or more people:
• Draw the power cord through the cabinet access
opening and center the range hood beneath the
cabinet.
• From inside of the range hood, install a screw into
the exact center of each hole.
• Tighten all screws until the range hood is securely
mounted to the bottom of the cabinet.
• Release the range hood.
CAUTION
Make sure the range hood is securely mounted before
releasing.
• For a more secure installation, install additional
screws into the pre-drilled holes on the backplate of
the range hood to secure it to the studs or lumbers.
If the pre-drilled holes don't align with the studs or
lumbers, drill new holes on the backplate instead.
Connecting the Vent System
• Use an 8" round metal duct (or semi-rigid aluminum
duct, follow the local building codes) to connect the
top exhaust on the Range Hood to the Roof / Wall
Cap.
• Use aluminum foil tape or duct tape to seal all
connections.
Electrical Connection
• This range hood comes with a power cord with
a 3-prong plug. Connect the power cord to a
designated grounded standard 110V outlet.
WARNING
Electrical Shock Hazard
Disconnect power before servicing
• In case of a direct connection to the house wiring is
preferred, do the following:
• Disconnect the power.
• Cut off the plug from the power cord.
• Connect the wires from the power cord to the
wires from the house wiring using UL listed
wire connectors.
• Store the excess wires in the wiring box.
Attach wood ller strips
Loading ...
Loading ...
Loading ...