Loading ...
Loading ...
Loading ...
Use To
Portrait Height
3–48 inches
76–1219 mm
Set the height for a portrait page orientation.
Notes:
• 14 inches is the US factory default setting. 356 mm is the
international factory default setting.
• If the specified height exceeds the maximum, then the printer uses
the maximum height allowed.
• The height can be increased in 0.01-inch or in 1-mm increments.
Feed Direction
Short Edge
Long Edge
Specify the feed direction.
Notes:
• Short Edge is the factory default setting.
• Long Edge appears only when the paper or specialty media can be
loaded in either direction.
Reports menu
Reports menu
Use To
Menu Settings Page Print a report containing information about the paper loaded in trays, installed
memory, total page count, alarms, timeouts, printer control panel language,
TCP/IP address, status of supplies, status of the network connection, and other
information.
Device Statistics Print a report containing printer statistics such as supply information and details
about printed pages.
Network Setup Page Print a report containing information about the network printer settings, such as
the TCP/IP address.
Note: This menu item appears only in network printers or printers connected
to print servers.
Network [x] Setup Page Print a report containing information about the network printer settings, such as
the TCP/IP address.
Note: This menu item appears only when there is more than one network
option installed and only in network printers or printers connected to print
servers.
Shortcut List Print a report containing information about configured shortcuts.
Fax Job Log Print a report containing information about the last 200 completed faxes.
Note: This menu item is available only when Enable Job Log is set to On in the
Fax Settings menu.
Fax Call Log Print a report containing information about the last 100 attempted, received, and
blocked calls.
Note: This menu item is available only when Enable Job Log is set to On in the
Fax Settings menu.
Understanding the printer menus 140
Loading ...
Loading ...
Loading ...