Loading ...
Loading ...
Loading ...
4
Add the ingredients to the bottle. Don’t fill the bottle above the 600 ml mark .
1 . Fit the blade assembly onto the bottle. Tighten the blade assembly firmly.
2 . Turn the bottle upside down so that the blade assembly is at the bottom.
3 . Gently press the bottle downwards then twist it clockwise until the bottle is locked.
Your blender will not work unless the bottle is correctly locked into position.
4 . Rotate the knob to operate your blender. You can choose different speed
according the hardness of the food materials you put into the bottle until your
drink is at the desired consistency. “1” is low speed for soft food, “2” is high speed
for hard food. “P” is pulse function.
5. When you have finished blending your drink, and the blades have stopped rotating,
twist the bottle anticlockwise to remove the bottle and blade assembly. Turn the
bottle the right side up then unscrew the blade assembly and fit one of the lids onto
the bottle. Close the cap of the lid firmly.
Notes: If the ingredients become stuck around the blade during processing, simply
remove the bottle from the motor unit, give it a shake then refit it and carry on processing.
Always remove the bottle when attempting to agitate or otherwise redistribute the
ingredients.
For ease of cleaning, we recommend that you clean your blend active bottle and cap as
soon as you have finished using them.
Crushing ice
Your blender can be used to crush ice. For best results and to prevent possible damage
to the blades, always add a small amount of liquid to the ice before processing. The liquid
can be water or one of the liquid ingredients from your recipe (fruit juice, etc.)
Loading ...
Loading ...