ARCHER MR500 User Manual

Loading ...

Chapter 11

Specify Your Network Settings

2. You can also appoint IP addresses within a specified range to devices of the same type by using Condition Pool

feature. For example, you can assign IP addresses within the range (192.168.1.50 to192.168.1.80) to Camera devices,

thus facilitating the network management. Enable DHCP feature and configure the parameters according to your

actual situation on Advanced > Network > LAN Settings page.

11. 4. 3. Reserve LAN IP Addresses

You can view and add a reserved address for a client. When you specify an IP address

for a device on the LAN, that device will always receive the same IP address each time

when it accesses the DHCP server. If there are some devices in the LAN that require

permanent IP addresses, please configure Address Reservation on the router for the

purpose.

Follow the steps below to reserve an IP address for your device.

1. Visit http://tplinkmodem.net, and log in with the password or your TP-Link ID.

2. Go to Advanced > Network > LAN Settings page.

3. Scroll down to locate the Address Reservation table and click Add to add an address

reservation entry for your device.

4. Enter the MAC address of the device for which you want to reserve IP address.

5. Specify the IP address which will be reserved by the router.

6. Check Enable this entry and click Save to make the settings effective.

Loading ...

TP-Link ARCHER MR500 AC1200 4G+ Cat6 Wireless Dual Band Gigabit Router, 4G Network SIM Slot Unlocked, with MU-MIMO technology, No Configuration required, Guest Network & Parental Control, UK Plug ( )