Loading ...
Loading ...
Loading ...
19
REM OTE CONTROL OPERATION
For remote to function make sure the heat er is plugged in and main pow er swit ch located on the
bottom left hand side is at posit ion I.
When operat ing the remot e make sure you point the remot e to the cent re of the fireplace and make
sure each time you press the button the buzzer inside the unit will beep once. It takes some time for
the receiver t o respond to the transmitter. Do not PRESS the butt ons more than once within two
seconds for correct operation.
Pow er on butt on: The power-on button at top left corner of the remot e is t he main ON/ OFF
power but t on. This will turn off all the functions and the fireplace will be in standby mode.
DISPLAY ON/OFF button: Swit ching t he fireplace flame and tray light ON/ OFF. It has functions of
set t ing memory.
DISPLAY BLUE button: Adjust the blue color brightness of flame and tray.
DISPLAY YELLOW button: Adjust the yellow color brightness of flame and tray.
DISPLAY ORANGE button: Adjust the orange color brightness of flame and tray.
M OOD LIGHT ON/ OFF button: Switching the mood light ON/ OFF.
ADJUST button: Swit ching the color of the mood light .
FLASH button: Swit ches the mood light into flash mode, this cycles through all mood light colors.
HEATER ON/OFF button: Switching the heater ON/OFF. It has functions of setting memory.
HIGH button: Press the high button to switch the heater to high heat setting 1465W.
LOW button: Press the low button to switch the heater to low heat setting 750W.
TEMP. button: Press the TEMP. button to switch the heater to AUTO mode. Under this mode
the heater will operate in similar way as explained above for the manual operation.
Loading ...
Loading ...
Loading ...