Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/223844-an-1417/bge.png)
— 14 —
STEP 10
Finishing Installation
Note: To avoid personal injury and/or damage to the range hood, this
installation step requires three people.
Installation
Figure 7
Figure 8 Figure 9
.................
.................
Figure 6
• Use 4 pieces ST4 × 8 mm mounting screws to attach the upper chimney into the hanging board and hold up the lower
chimney with the supplied `S` hook (see Figure 6).
• Use 16 pieces M4 × 10mm mounting screws to attach the hood into angle irons (see Figure 7).
• Attach the ducting pipe on the outlet (see Figure 8).
• After nishing all the above installation steps, remove the `S` hook
and put down the lower chimney (see Figure 9).
Loading ...
Loading ...
Loading ...