Home
Bookmarks
Home
Bosch
Bosch HIIP054C/05 User Manual
Bosch HIIP054C/05 " Benchmark SIR Induction, SS, CA"
User Manual
For HIIP054C/05.
PDF File Manual
,
112 pages
,
Read Online
|
Download pdf file
How This Manual Is Organized
Safety
Proper Installation and Maintenance
Fire Safety
1) You know you have a CLASS ABC extinguisher and you already know how to operate it.
2) The fire is small and contained in the area where it started.
3) The fire department is being called.
Burn Prevention
Use this appliance only for its intended use as described in this manual. NEVER use this appliance as a space heater to heat or warm the room. Doing so may result in carbon monoxide poisoning and overheating the appliance. Never use the appliance for...
Electromagnetic interference
It is the user’s responsibility to correct any interference.
Child Safety
Cookware Safety
Cleaning Safety
1) Providing good ventilation when cooking with gas.
2) Providing good ventilation during and immediately after self-cleaning the oven.
3) Operating the unit according to the instructions in this manual.
Cookware Safety
Food Safety
1) DO NOT use a warming drawer to heat cold food (exception: it is safe to use the drawer to crisp crackers, chips or dry cereal and to warm plates.
2) Be sure to maintain proper food temperature. The USDA recommends holding hot food at 140°F or warmer.
3) DO NOT warm food for longer than one hour.
Getting Started
Parts and Accessories
Retained Heat
Hot Surface Indicator
Oven Features
Cooling Fan
Convection Fan
Oven Bottom
Note:
Oven Vent
Automatic Shutoff
Self-cleaning
Indicators and Other Features
Stand By Mode
Accessories
Inserting Racks
Flat Rack
To insert the flat rack into the oven:
1. Grasp rack firmly on both sides.
2. Insert rack (see picture).
3. Tilt rack up (A) to allow the upwardly sloped rear of the rack to slide under the stop molded into the front portion of the rack guide above.
4. When the back of the rack is past this stop, lower the front of the rack to a horizontal position (B) and push it the rest of the way in.
To remove the flat rack from the oven:
1. Grasp rack firmly on both sides and pull rack toward you.
2. When the stop is reached, tilt rack up so that the upwardly sloped back of the rack can pass under the stop. Pull the rack the rest of the way out.
Telescopic Rack (some models)
To insert the telescopic rack into the oven:
1. Slide the rack in evenly until the rear of the rack is about 2 inches from the back of the oven.
2. Tilt the front of the rack up about 3/4’s of an inch (A) and finish pushing the rack all the way back (B).
3. The back of the telescopic rack drops into place.
4. Pull the rack forward to engage the bottom of the rack onto the rear of the rack position guide.
5. Lower the front of the rack to finish seating it on the rack guide. The rack should feel stable when properly seated.
6. Slide the movable part of the telescopic rack in and out a few times to make sure it is able to move freely and that the non-moving part of the telescopic rack is securely anchored.
To remove the telescopic rack from the oven:
1. Lift the front of the telescopic rack assembly about 1/2 inch and push the rack to the rear about 3/4 inch. This allows the rack to disengage from the rack position guide.
2. Lift the rear of the telescopic rack assembly so it clears the rack position guide and gently pull the rack from the oven.
Before Using the Appliance for the First Time
Operation - Cooktop
Control Panel
The Elements
SpeedBoost function
3. Touch the + or - key in the timer display. The basic settings are displayed:
The timer
Panel Lock
4. Use the @ and A keys until the desired setting appears in the kitchen timer display.
Turn the cooktop off with the On/Off switch.
Operation - Oven
Oven Control Panel
Touchpads
Touchpad Descriptions
More Modes
Additional modes are available by pressing the More Modes touchpad. These modes include Convection Broil, Warm, Pizza, Proof Dough and Roast. These are discussed in the Getting the Most Out of Your Appliance section later in this manual.
Display Symbols
About the Oven
Basic Features
Setting the Clock
To set the clock:
1. The oven must be in Stand-By mode (oven is powered on, but no cooking mode or timer in operation).
2. To access the clock set mode:
3. Use the numeric keypad to enter the desired time. Each number pressed is entered at the right and moving previously entered digits to the left. To set “12:45 pm”, press 1, 2, 4, 5.
4. When the desired time is entered, set the time by pressing Enter.
Setting the Cooking Mode and Temperature
1. Press the desired Cooking Mode Touchpad. The cooking mode and default temperature are displayed. The temperature flashes to show it can be edited.
2. Press Enter to start the mode using the default temperature.
3. To change the temperature, enter the new temperature using the numeric touchpads. 375° is used for this example. Press Enter to set the updated temperature.
4. Preheating starts.
1. Press the numeric keys to enter the desired temperature setting. The temperature entered is displayed beside the current time.
2. Select a cooking mode that is compatible with the temperature entered. If no cooking mode is selected within 5 seconds of setting the temperature, an error tone sounds and a SELECT MODE message is displayed and blinks.
3. Press a Mode Selection Touchpad to select a cooking mode.
1. Press the Cooking Mode Touchpad.
2. The current temperature flashes. Use the numeric touchpads to enter a new temperature. Press Enter.
Timer
To set a kitchen timer:
1. Press the Kitchen Timer On/Off.
2. Press Enter.
3. When the kitchen timer has counted down to zero an alarm tone sounds every 10 seconds for 2 minutes and the message “TIMER END” is displayed.
Cancel the kitchen timer - by pressing the Kitchen Timer On/Off button.
Note
To edit a kitchen timer:
1. Press the Kitchen Timer On/Off button.
2. The current time value blinks and can be edited.
To set an oven timer:
1. Press the Oven Timer touchpad.
2. Select mode, press Enter.
3. When the timer reaches :00 the cooking mode ends and the message “OVEN TIMER FINISHED” is displayed. The oven alarm tone sounds every 10 seconds for 2 minutes.
1. If the oven timer is running and the time remaining needs to be changed, enter the oven timer mode by pressing the Oven Timer touchpad.
2. The temperature blinks, indicating it can be edited. Input a new temperature or press Enter for no change.
3. The timer value blinks, indicating it can be edited. Input the new time and restart the timer by pressing the Enter touchpad.
The oven timer may be cleared by entering 0:00.
Fast Preheat
1. Press Fast Preheat.
2. Press Start.
Special Features
Probe
1. Insert the probe into the meat as described above. The probe symbol is displayed.
2. Connect the probe to the oven. If the probe is not connected to the oven prior to starting Probe mode, an error tone sounds and the message “INSERT PROBE” is displayed.
3. Set the cooking mode and temperature.
4. The Set Probe Temp screen is displayed. A three digit input prompt “- - -” blinks in the lower right corner. Use the numeric keypad to enter the desired probe temperature and press Enter on the numeric keypad.
5. The probe current temperature and target temperature are both displayed in the format “105 / 180” at the lower right corner of the display. The actual temperature will display < 80 until the food temperature reaches 80° F.
6. When the probe temperature reaches the set temperature, the cooking mode turns off. The current time is displayed and the message “COOKING COMPLETE” blinks at the bottom left of the display. An alarm tone sounds every 10 seconds for 2 minutes.
Note:
Sabbath Mode
1. Begin a Bake operation. While Bake is running, press and hold the Oven Timer touchpad for five seconds.
2. Press Enter to accept the default 74:00 hours and start Sabbath Mode. Or use the numeric keypad to enter the desired Sabbath mode timer value. Timer values between 0:01 and 74:00 can be entered.
3. Once Sabbath mode has begun, the display changes to show the message “SABBATH ON”.
4. After the Sabbath mode countdown reaches zero, the oven displays the current time and the message “SABBATH”. No changes can be made at this point. To end the Sabbath Mode and return to normal function, press the Oven Clear/Off touchpad.
Note:
1. Press the Bake touchpad.
2. Enter the new desired set temperature.
3. Press Enter.
Panel Lock
1. To enable Panel Lock, press and hold the Panel Lock touchpad for 3 seconds (in stand by mode).
2. To disable Panel Lock, press and hold the Panel Lock touchpad for 3 seconds. The display returns to stand by mode.
Settings
1. Press the Settings touchpad.
2. The first setup item is displayed. The display shows “SET CLOCK”. Press Settings again to access the settings menu.
3. To display a different setup item, press the number corresponding to that setting (see table following or press the Settings touchpad to cycle through available options).
4. To change the value for the displayed setting press the Enter touchpad to enter the edit mode. Use the numeric keypad to change the setting value. The corresponding setting value is shown in the table following.
Settings Menu Options
Operation - Warming Drawer
About the Warming Drawer
Warming Drawer Specifications
Operation
Preheating
Preheat Times:
Turning Warming Drawer On and Off
1. Press the Warming Drawer touchpad.
2. WARMING DRAWER will be displayed with the default setting “MED”. The warming drawer amber icon is displayed below the clock.
3. To accept the “MED” setting, press the “Enter” touchpad on the numeric keypad. The setting is accepted and the warming drawer icon remains illuminated. If enter is not pressed, the warming drawer setting is not accepted and the warming dra...
4. To change the setting, when “MED” is displayed, press the warming drawer touchpad again. The setting changes to “HIGH”. Press the warming drawer touchpad again to change the setting to “LOW”. To accept a setting, press the Enter key on...
5. To turn the warming drawer off, press the warming drawer touchpad and the warming drawer will turn off and the warming drawer icon will no longer appear under the clock.
Warming Empty Serving Bowls and Plates
Getting the Most Out of Your Cooktop
Cooktop Cooking Guide
Getting the Most Out of Your Oven
General Tips
Pan Placement
Rack Position
Aluminum Foil
Preheating the Oven
Preheat Reminders
For Best Results
Baking Pans and Dishes
Opening the Oven Door
High Altitude Baking
Condensation
Temperature Range by Cooking Mode
Cooking Modes
Bake
Tips
Auto Convection Conversion
Convection Bake
Tips
Convection Multi-Rack
Tips
Pizza
Tips
Roast
Tips:
Convection Roast
Tips:
Broil
Tips:
Convection Broil
Tips:
Proof
Warm
Getting the Most Out of Your Warming Drawer
About the Appliance
General Tips
Use of Your Appliance
IMPORTANT:
Note:
Preheating the Warming Drawer
Warming Food
1. Preheat warming drawer.
2. Place cooked, hot food in the drawer.
Warming Plates and Bowls
Crisping Stale Items
1. Press LOW.
2. Preheat for 10 minutes, then place dish in drawer.
3. Set the warming timer.
4. Check crispness after 45 minutes. Add time as needed.
Temperature Recommendations
Cleaning and Maintenance
Care and Cleaning
Cleaning the Cooktop
Precautions for Long Life and Good Appearance of the Surface
Before Use Care
Daily Cleaning Techniques
1. Clean the surface when completely cool with the glass ceramic cooktop cleaner. Exception: Remove dry sugar, sugar syrup, tomato products and milk immediately with the razor blade scraper (See Cooktop Care Chart, next page).
2. Wipe off spatters with a clean, damp sponge or paper towel. Rinse and dry. Use white vinegar if smudge remains; rinse.
3. Apply a small amount of the glass ceramic cooktop cleaner. When dry, buff surface with a clean paper towel or cloth.
Using the Razor Blade Scraper
Figure 1: Scraper
Cleaning the Control Knobs
1. Pull out and off to remove knobs. Wipe with hot, soapy cloth, rinse and dry. Do not soak.
2. To replace, push knob straight onto shaft.
Do Not Use the Following Cleaners
Cooktop Care Chart
Cleaning the Oven
Self Clean
NOTICE:
NOTICE:
To set the self-clean mode:
1. Remove all accessories and racks from the oven.
2. If there is a cooking mode on, press Oven Clear/Off to end the running mode.
3. Press the Self Clean touchpad below the display.
4. When the desired self-clean time is displayed, press Enter on the numeric keypad.
5. Self Clean starts and the oven self-clean timer begins its countdown.
6. When the cool down is complete, the message “SELF CLEAN FINISHED” is displayed. Continue to use caution when opening the oven door.
7. Press Oven Clear/Off to clear the display when self- clean is finished.
8. After the oven has cooled down and the door is unlocked, wipe remaining ash from the oven using a moist cloth.
Note:
Avoid These Cleaners
Oven Cleaning Guide
Cleaning the Warming Drawer
Maintenance
Oven Maintenance
Replacing an Oven Light
To change the bulb:
1. Turn off power to the oven at the main power supply (fuse or breaker box).
2. Remove the glass cover by unscrewing it. Turn the glass counterclockwise to remove it.
3. Remove the bulb. The bulb unscrews counterclockwise.
4. Grasp the new bulb with a clean, dry cloth to prevent depositing skin oils on the glass which could lead to premature bulb failure. Replace the bulb by screwing it in turning the bulb clockwise.
5. Screw the glass cover back on.
6. Turn power back on at the main power supply (fuse or breaker box).
Removing the Oven Door
1. Open the oven door to its fully open, horizontal position.
2. Flip levers on hinges toward you.
Note: It may be necessary to use a tool, such as a screwdriver, to gently pry the upper part of the lever away from the housing. Take care to avoid scratching the housing.
3. Bring both door hinge levers to their fullest down position as shown in the illustration. The left and right door hinges differ slightly but operate in the same manner.
4. Close the oven door until it catches on the hinge stop levers, locking the hinges at the proper angle for door removal. The door will be open about 7 inches at the top. This takes the spring tension off the hinges so the door can be easily lifted out
5. The door is heavy. Use both hands to firmly grip it by the sides. Do not grip the door by the handle. Maintaining the door angle, lift the door straight up approximately 3/4" to unhook the hinges from the slots and then pull it out towards you unt...
6. Place the door in a convenient and stable location for cleaning.
To replace the oven door:
1. Holding the door firmly in both hands, grip it on either side, not by the handle.
2. Tilt the door back slightly towards you until it opens about 7" at the top.
3. Slide the hinges into the slots as far as they will go and then lower the door straight down. The angle of the door may need to be adjusted slightly to allow the hinges to engage properly and the door to lower into place. The door should lower bou...
4. Once both hinges are fully engaged as described in Step 3, gently open the door until it is fully open.
5. Push the levers on both the hinges up and forward until they are locked into the slot, flush with the front of the oven body.
6. Close and open door slowly to be sure it is correctly and securely in place.
Warming Drawer Maintenance
Removing the Drawer
1. Pull drawer to fully open position.
2. Press down right drawer clip.
3. Lift up left drawer clip.
4. Firmly pull the drawer straight out. Retract housing slides while drawer is removed
Replacing the Drawer
1. Be sure housing slides are pushed inside housing.
2. Align the drawer rails with the housing slides attached to the drawer housing.
3. Firmly push the drawer straight into the drawer housing until the drawer clicks into place. Note: The drawer has a “push-to-open” operation. Pressing the lower center front of the drawer causes the drawer to self-open.
4. Open and close drawer to test operation. Note: if the drawer will not close, verify that the rails on the drawer are properly aligned to housing slides and that the rail release levers are properly positioned.
Service
How to Obtain Service or Parts
Product Data Plate
Self Help
Cooktop Troubleshooting
.
Oven Troubleshooting
Use these suggestions before calling for service to avoid service charges.
Statement of Limited Product Warranty
What this Warranty Covers & Who it Applies to
How Long the Warranty Lasts
Repair/Replace as Your Exclusive Remedy
Out of Warranty Product
Warranty Exclusions
How to Obtain Warranty Service:
Cooking Charts
Leere Seite
Page 1/112
Page 1
Page 2
Page 3
Page 4
Page 5
Page 6
Page 7
Page 8
Page 9
Page 10
Page 11
Page 12
Page 13
Page 14
Page 15
Page 16
Page 17
Page 18
Page 19
Page 20
Page 21
Page 22
Page 23
Page 24
Page 25
Page 26
Page 27
Page 28
Page 29
Page 30
Page 31
Page 32
Page 33
Page 34
Page 35
Page 36
Page 37
Page 38
Page 39
Page 40
Page 41
Page 42
Page 43
Page 44
Page 45
Page 46
Page 47
Page 48
Page 49
Page 50
Page 51
Page 52
Page 53
Page 54
Page 55
Page 56
Page 57
Page 58
Page 59
Page 60
Page 61
Page 62
Page 63
Page 64
Page 65
Page 66
Page 67
Page 68
Page 69
Page 70
Page 71
Page 72
Page 73
Page 74
Page 75
Page 76
Page 77
Page 78
Page 79
Page 80
Page 81
Page 82
Page 83
Page 84
Page 85
Page 86
Page 87
Page 88
Page 89
Page 90
Page 91
Page 92
Page 93
Page 94
Page 95
Page 96
Page 97
Page 98
Page 99
Page 100
Page 101
Page 102
Page 103
Page 104
Page 105
Page 106
Page 107
Page 108
Page 109
Page 110
Page 111
Page 112
Contents
Table of Contents
Search
Previous
Next
Troubleshooting
Bookmarks
Use and Care Manual
Induction Ranges
Slide-in Ranges
HIIP054
Loading ...
Loading ...
Loading ...
File type: PDF
File name: 24314228_hiip054c-01.pdf
File size: 4.13 MB
File Language: English
Pages: 112
Author: Bosch
File created: 2009-02-21
Published: 2023-12-24
Updated: 2023-12-24
Download File
Other documents for Bosch HIIP054C/05
The following documents are available:
User Manual
User Manual - (English)
Read Online
|
Download pdf
Photos
Photos:
View Photos
Specifications
Brand:
Bosch
Model: HIIP054C/05
View in the file:
Full Specifications
See other models:
SMP46MS00S/01
SHV09A03/11
PFB2030/01
KIE26441/03
SGI09T05EU/03
Related Products
Bosch HIIP054U/05
Bosch HIIP054C/06
Bosch HIIP054C/03
Bosch HIIP054C/04
Bosch HIIP054C/02
Bosch HIIP054U/03
Bosch HIIP054U/02
Bosch HIIP054U/06
Bosch HIIP054U/04
Bosch HIIP055U/01
Bosch HIIP054U/01
Bosch HIIP055U
Bosch HIIP054U
Bosch HIIP056U
Bosch HIIP057U
Table of Contents
×
How This Manual Is Organized
0
Safety
0
Proper Installation and Maintenance
0
Fire Safety
0
1) You know you have a CLASS ABC extinguisher and you already know how to operate it.
0
2) The fire is small and contained in the area where it started.
0
3) The fire department is being called.
0
Burn Prevention
0
Use this appliance only for its intended use as described in this manual. NEVER use this appliance as a space heater to heat or warm the room. Doing so may result in carbon monoxide poisoning and overheating the appliance. Never use the appliance for...
0
Electromagnetic interference
0
It is the user’s responsibility to correct any interference.
0
Child Safety
0
Cookware Safety
0
Cleaning Safety
0
1) Providing good ventilation when cooking with gas.
0
2) Providing good ventilation during and immediately after self-cleaning the oven.
0
3) Operating the unit according to the instructions in this manual.
0
Cookware Safety
0
Food Safety
0
1) DO NOT use a warming drawer to heat cold food (exception: it is safe to use the drawer to crisp crackers, chips or dry cereal and to warm plates.
0
2) Be sure to maintain proper food temperature. The USDA recommends holding hot food at 140°F or warmer.
0
3) DO NOT warm food for longer than one hour.
0
Getting Started
0
Parts and Accessories
0
Retained Heat
0
Hot Surface Indicator
0
Oven Features
0
Cooling Fan
0
Convection Fan
0
Oven Bottom
0
Note:
0
Oven Vent
0
Automatic Shutoff
0
Self-cleaning
0
Indicators and Other Features
0
Stand By Mode
0
Accessories
0
Inserting Racks
0
Flat Rack
0
To insert the flat rack into the oven:
0
1. Grasp rack firmly on both sides.
0
2. Insert rack (see picture).
0
3. Tilt rack up (A) to allow the upwardly sloped rear of the rack to slide under the stop molded into the front portion of the rack guide above.
0
4. When the back of the rack is past this stop, lower the front of the rack to a horizontal position (B) and push it the rest of the way in.
0
To remove the flat rack from the oven:
0
1. Grasp rack firmly on both sides and pull rack toward you.
0
2. When the stop is reached, tilt rack up so that the upwardly sloped back of the rack can pass under the stop. Pull the rack the rest of the way out.
0
Telescopic Rack (some models)
0
To insert the telescopic rack into the oven:
0
1. Slide the rack in evenly until the rear of the rack is about 2 inches from the back of the oven.
0
2. Tilt the front of the rack up about 3/4’s of an inch (A) and finish pushing the rack all the way back (B).
0
3. The back of the telescopic rack drops into place.
0
4. Pull the rack forward to engage the bottom of the rack onto the rear of the rack position guide.
0
5. Lower the front of the rack to finish seating it on the rack guide. The rack should feel stable when properly seated.
0
6. Slide the movable part of the telescopic rack in and out a few times to make sure it is able to move freely and that the non-moving part of the telescopic rack is securely anchored.
0
To remove the telescopic rack from the oven:
0
1. Lift the front of the telescopic rack assembly about 1/2 inch and push the rack to the rear about 3/4 inch. This allows the rack to disengage from the rack position guide.
0
2. Lift the rear of the telescopic rack assembly so it clears the rack position guide and gently pull the rack from the oven.
0
Before Using the Appliance for the First Time
0
Operation - Cooktop
0
Control Panel
0
The Elements
0
SpeedBoost function
0
3. Touch the + or - key in the timer display. The basic settings are displayed:
0
The timer
0
Panel Lock
0
4. Use the @ and A keys until the desired setting appears in the kitchen timer display.
0
Turn the cooktop off with the On/Off switch.
0
Operation - Oven
0
Oven Control Panel
0
Touchpads
0
Touchpad Descriptions
0
More Modes
0
Additional modes are available by pressing the More Modes touchpad. These modes include Convection Broil, Warm, Pizza, Proof Dough and Roast. These are discussed in the Getting the Most Out of Your Appliance section later in this manual.
0
Display Symbols
0
About the Oven
0
Basic Features
0
Setting the Clock
0
To set the clock:
0
1. The oven must be in Stand-By mode (oven is powered on, but no cooking mode or timer in operation).
0
2. To access the clock set mode:
0
3. Use the numeric keypad to enter the desired time. Each number pressed is entered at the right and moving previously entered digits to the left. To set “12:45 pm”, press 1, 2, 4, 5.
0
4. When the desired time is entered, set the time by pressing Enter.
0
Setting the Cooking Mode and Temperature
0
1. Press the desired Cooking Mode Touchpad. The cooking mode and default temperature are displayed. The temperature flashes to show it can be edited.
0
2. Press Enter to start the mode using the default temperature.
0
3. To change the temperature, enter the new temperature using the numeric touchpads. 375° is used for this example. Press Enter to set the updated temperature.
0
4. Preheating starts.
0
1. Press the numeric keys to enter the desired temperature setting. The temperature entered is displayed beside the current time.
0
2. Select a cooking mode that is compatible with the temperature entered. If no cooking mode is selected within 5 seconds of setting the temperature, an error tone sounds and a SELECT MODE message is displayed and blinks.
0
3. Press a Mode Selection Touchpad to select a cooking mode.
0
1. Press the Cooking Mode Touchpad.
0
2. The current temperature flashes. Use the numeric touchpads to enter a new temperature. Press Enter.
0
Timer
0
To set a kitchen timer:
0
1. Press the Kitchen Timer On/Off.
0
2. Press Enter.
0
3. When the kitchen timer has counted down to zero an alarm tone sounds every 10 seconds for 2 minutes and the message “TIMER END” is displayed.
0
Cancel the kitchen timer - by pressing the Kitchen Timer On/Off button.
0
Note
0
To edit a kitchen timer:
0
1. Press the Kitchen Timer On/Off button.
0
2. The current time value blinks and can be edited.
0
To set an oven timer:
0
1. Press the Oven Timer touchpad.
0
2. Select mode, press Enter.
0
3. When the timer reaches :00 the cooking mode ends and the message “OVEN TIMER FINISHED” is displayed. The oven alarm tone sounds every 10 seconds for 2 minutes.
0
1. If the oven timer is running and the time remaining needs to be changed, enter the oven timer mode by pressing the Oven Timer touchpad.
0
2. The temperature blinks, indicating it can be edited. Input a new temperature or press Enter for no change.
0
3. The timer value blinks, indicating it can be edited. Input the new time and restart the timer by pressing the Enter touchpad.
0
The oven timer may be cleared by entering 0:00.
0
Fast Preheat
0
1. Press Fast Preheat.
0
2. Press Start.
0
Special Features
0
Probe
0
1. Insert the probe into the meat as described above. The probe symbol is displayed.
0
2. Connect the probe to the oven. If the probe is not connected to the oven prior to starting Probe mode, an error tone sounds and the message “INSERT PROBE” is displayed.
0
3. Set the cooking mode and temperature.
0
4. The Set Probe Temp screen is displayed. A three digit input prompt “- - -” blinks in the lower right corner. Use the numeric keypad to enter the desired probe temperature and press Enter on the numeric keypad.
0
5. The probe current temperature and target temperature are both displayed in the format “105 / 180” at the lower right corner of the display. The actual temperature will display < 80 until the food temperature reaches 80° F.
0
6. When the probe temperature reaches the set temperature, the cooking mode turns off. The current time is displayed and the message “COOKING COMPLETE” blinks at the bottom left of the display. An alarm tone sounds every 10 seconds for 2 minutes.
0
Note:
0
Sabbath Mode
0
1. Begin a Bake operation. While Bake is running, press and hold the Oven Timer touchpad for five seconds.
0
2. Press Enter to accept the default 74:00 hours and start Sabbath Mode. Or use the numeric keypad to enter the desired Sabbath mode timer value. Timer values between 0:01 and 74:00 can be entered.
0
3. Once Sabbath mode has begun, the display changes to show the message “SABBATH ON”.
0
4. After the Sabbath mode countdown reaches zero, the oven displays the current time and the message “SABBATH”. No changes can be made at this point. To end the Sabbath Mode and return to normal function, press the Oven Clear/Off touchpad.
0
Note:
0
1. Press the Bake touchpad.
0
2. Enter the new desired set temperature.
0
3. Press Enter.
0
Panel Lock
0
1. To enable Panel Lock, press and hold the Panel Lock touchpad for 3 seconds (in stand by mode).
0
2. To disable Panel Lock, press and hold the Panel Lock touchpad for 3 seconds. The display returns to stand by mode.
0
Settings
0
1. Press the Settings touchpad.
0
2. The first setup item is displayed. The display shows “SET CLOCK”. Press Settings again to access the settings menu.
0
3. To display a different setup item, press the number corresponding to that setting (see table following or press the Settings touchpad to cycle through available options).
0
4. To change the value for the displayed setting press the Enter touchpad to enter the edit mode. Use the numeric keypad to change the setting value. The corresponding setting value is shown in the table following.
0
Settings Menu Options
0
Operation - Warming Drawer
0
About the Warming Drawer
0
Warming Drawer Specifications
0
Operation
0
Preheating
0
Preheat Times:
0
Turning Warming Drawer On and Off
0
1. Press the Warming Drawer touchpad.
0
2. WARMING DRAWER will be displayed with the default setting “MED”. The warming drawer amber icon is displayed below the clock.
0
3. To accept the “MED” setting, press the “Enter” touchpad on the numeric keypad. The setting is accepted and the warming drawer icon remains illuminated. If enter is not pressed, the warming drawer setting is not accepted and the warming dra...
0
4. To change the setting, when “MED” is displayed, press the warming drawer touchpad again. The setting changes to “HIGH”. Press the warming drawer touchpad again to change the setting to “LOW”. To accept a setting, press the Enter key on...
0
5. To turn the warming drawer off, press the warming drawer touchpad and the warming drawer will turn off and the warming drawer icon will no longer appear under the clock.
0
Warming Empty Serving Bowls and Plates
0
Getting the Most Out of Your Cooktop
0
Cooktop Cooking Guide
0
Getting the Most Out of Your Oven
0
General Tips
0
Pan Placement
0
Rack Position
0
Aluminum Foil
0
Preheating the Oven
0
Preheat Reminders
0
For Best Results
0
Baking Pans and Dishes
0
Opening the Oven Door
0
High Altitude Baking
0
Condensation
0
Temperature Range by Cooking Mode
0
Cooking Modes
0
Bake
0
Tips
0
Auto Convection Conversion
0
Convection Bake
0
Tips
0
Convection Multi-Rack
0
Tips
0
Pizza
0
Tips
0
Roast
0
Tips:
0
Convection Roast
0
Tips:
0
Broil
0
Tips:
0
Convection Broil
0
Tips:
0
Proof
0
Warm
0
Getting the Most Out of Your Warming Drawer
0
About the Appliance
0
General Tips
0
Use of Your Appliance
0
IMPORTANT:
0
Note:
0
Preheating the Warming Drawer
0
Warming Food
0
1. Preheat warming drawer.
0
2. Place cooked, hot food in the drawer.
0
Warming Plates and Bowls
0
Crisping Stale Items
0
1. Press LOW.
0
2. Preheat for 10 minutes, then place dish in drawer.
0
3. Set the warming timer.
0
4. Check crispness after 45 minutes. Add time as needed.
0
Temperature Recommendations
0
Cleaning and Maintenance
0
Care and Cleaning
0
Cleaning the Cooktop
0
Precautions for Long Life and Good Appearance of the Surface
0
Before Use Care
0
Daily Cleaning Techniques
0
1. Clean the surface when completely cool with the glass ceramic cooktop cleaner. Exception: Remove dry sugar, sugar syrup, tomato products and milk immediately with the razor blade scraper (See Cooktop Care Chart, next page).
0
2. Wipe off spatters with a clean, damp sponge or paper towel. Rinse and dry. Use white vinegar if smudge remains; rinse.
0
3. Apply a small amount of the glass ceramic cooktop cleaner. When dry, buff surface with a clean paper towel or cloth.
0
Using the Razor Blade Scraper
0
Figure 1: Scraper
0
Cleaning the Control Knobs
0
1. Pull out and off to remove knobs. Wipe with hot, soapy cloth, rinse and dry. Do not soak.
0
2. To replace, push knob straight onto shaft.
0
Do Not Use the Following Cleaners
0
Cooktop Care Chart
0
Cleaning the Oven
0
Self Clean
0
NOTICE:
0
NOTICE:
0
To set the self-clean mode:
0
1. Remove all accessories and racks from the oven.
0
2. If there is a cooking mode on, press Oven Clear/Off to end the running mode.
0
3. Press the Self Clean touchpad below the display.
0
4. When the desired self-clean time is displayed, press Enter on the numeric keypad.
0
5. Self Clean starts and the oven self-clean timer begins its countdown.
0
6. When the cool down is complete, the message “SELF CLEAN FINISHED” is displayed. Continue to use caution when opening the oven door.
0
7. Press Oven Clear/Off to clear the display when self- clean is finished.
0
8. After the oven has cooled down and the door is unlocked, wipe remaining ash from the oven using a moist cloth.
0
Note:
0
Avoid These Cleaners
0
Oven Cleaning Guide
0
Cleaning the Warming Drawer
0
Maintenance
0
Oven Maintenance
0
Replacing an Oven Light
0
To change the bulb:
0
1. Turn off power to the oven at the main power supply (fuse or breaker box).
0
2. Remove the glass cover by unscrewing it. Turn the glass counterclockwise to remove it.
0
3. Remove the bulb. The bulb unscrews counterclockwise.
0
4. Grasp the new bulb with a clean, dry cloth to prevent depositing skin oils on the glass which could lead to premature bulb failure. Replace the bulb by screwing it in turning the bulb clockwise.
0
5. Screw the glass cover back on.
0
6. Turn power back on at the main power supply (fuse or breaker box).
0
Removing the Oven Door
0
1. Open the oven door to its fully open, horizontal position.
0
2. Flip levers on hinges toward you.
0
Note: It may be necessary to use a tool, such as a screwdriver, to gently pry the upper part of the lever away from the housing. Take care to avoid scratching the housing.
0
3. Bring both door hinge levers to their fullest down position as shown in the illustration. The left and right door hinges differ slightly but operate in the same manner.
0
4. Close the oven door until it catches on the hinge stop levers, locking the hinges at the proper angle for door removal. The door will be open about 7 inches at the top. This takes the spring tension off the hinges so the door can be easily lifted out
0
5. The door is heavy. Use both hands to firmly grip it by the sides. Do not grip the door by the handle. Maintaining the door angle, lift the door straight up approximately 3/4" to unhook the hinges from the slots and then pull it out towards you unt...
0
6. Place the door in a convenient and stable location for cleaning.
0
To replace the oven door:
0
1. Holding the door firmly in both hands, grip it on either side, not by the handle.
0
2. Tilt the door back slightly towards you until it opens about 7" at the top.
0
3. Slide the hinges into the slots as far as they will go and then lower the door straight down. The angle of the door may need to be adjusted slightly to allow the hinges to engage properly and the door to lower into place. The door should lower bou...
0
4. Once both hinges are fully engaged as described in Step 3, gently open the door until it is fully open.
0
5. Push the levers on both the hinges up and forward until they are locked into the slot, flush with the front of the oven body.
0
6. Close and open door slowly to be sure it is correctly and securely in place.
0
Warming Drawer Maintenance
0
Removing the Drawer
0
1. Pull drawer to fully open position.
0
2. Press down right drawer clip.
0
3. Lift up left drawer clip.
0
4. Firmly pull the drawer straight out. Retract housing slides while drawer is removed
0
Replacing the Drawer
0
1. Be sure housing slides are pushed inside housing.
0
2. Align the drawer rails with the housing slides attached to the drawer housing.
0
3. Firmly push the drawer straight into the drawer housing until the drawer clicks into place. Note: The drawer has a “push-to-open” operation. Pressing the lower center front of the drawer causes the drawer to self-open.
0
4. Open and close drawer to test operation. Note: if the drawer will not close, verify that the rails on the drawer are properly aligned to housing slides and that the rail release levers are properly positioned.
0
Service
0
How to Obtain Service or Parts
0
Product Data Plate
0
Self Help
0
Cooktop Troubleshooting
0
.
0
Oven Troubleshooting
0
Use these suggestions before calling for service to avoid service charges.
0
Statement of Limited Product Warranty
0
What this Warranty Covers & Who it Applies to
0
How Long the Warranty Lasts
0
Repair/Replace as Your Exclusive Remedy
0
Out of Warranty Product
0
Warranty Exclusions
0
How to Obtain Warranty Service:
0
Cooking Charts
0
Leere Seite
2
Search:
×
Search
