Loading ...
Loading ...
Loading ...
Delay Hours
Select this option to run your dishwasher at a later time or
during off-peak hours. You can add items to the load
anytime during the delay countdown. After adding items,
close the door firmly until it latches. The delay countdown
will not continue if the door is not latched.
• You can delay the start of a cycle up to 9 hours.
• The first time you use Delay Hours, you will see
showing a 1 hour delay.
To delay the start
1. Close the door.
2. Select a wash cycle and options.
3. Repeatedly press
@
until you see the desired hours of delay in the display.
When the delay reaches 9 hours, the delay turns off.
Press DELAY HOURS again to select a new number of
delay hours.
4. Press START.
NOTE: To cancel the delay, press CANCEL/DRAIN until all
Delay Hours lights are off.
IMPORTANT:
• Operate your dishwasher only when you are at home.
• If your home is equipped with a water softener, do not
start the dishwasher during the regeneration of the
softener.
Follow the progress of your dishwasher with the Cycle
Status Indicators. CLEAN glows when a cycle is finished.
The light turns off when you open the door or press
Cancel/Drain.
m O I m m
Sensing
Your dishwasher senses the soil level on the dishes. Soil
level determines the length of some cycles, the amount of
heat added to the wash or rinse, and the cycle needed for
the load. SENSING glows during the soil sensing parts of
the cycle. Wash action continues while sensing occurs.
Water Heating
WATER HEATING glows, and the cycle progression
pauses, whenever water is heated during a cycle. Wash or
rinse action continues as the water heats.
Sani Complete
If you select the Sani Rinse option, SANI COMPLETE
glows when the Sani Rinse cycle is finished. If your
dishwasher did not properly sanitize your dishes, the light
flashes at the end of the cycle. This can happen if the cycle
is interrupted. The light goes off when you open the door.
Lock On
When LOCK ON is lit, all buttons are disabled.
LOCKON
You can turn on the Lock while the dishwasher is running.
To lock or unlock the controls, see "Option Selections."
During drying, you can see steam escaping through the
vent at the upper left corner of the doon This is normal as
the heat dries your dishes.
,1.-." "¢."
"4--.
IMPORTANT: The vapor is hot. Do not touch the vent
during drying.
Ore Protection F
The overfill protection float (in the front right corner of the
dishwasher tub) keeps the dishwasher from overfilling. It
must be in place for the dishwasher to operate.
Check under the float for objects that may keep the
protector from moving up or down.
17
Loading ...
Loading ...
Loading ...