Loading ...
Loading ...
Loading ...
12
12.0 Troubleshooting EPR-1460 Plate Roller
Table 2
Symptom Possible Cause Correction *
Machine doesn’t
operate; rolls won’t
move.
No incoming power. Check power source and connections.
Emergency stop engaged.
Release emergency stop switch by
rotating clockwise (check both switch
locations).
Jam nut is loose. Tighten nut to secure stationary roll.
Gears damaged.
Inspect gears; repair/replace as
needed.
Cones are made when
trying to make
cylinders.
Rolls not parallel.
Adjust idler (rear) roll as needed until
idler roll is parallel to stationary (top)
roll.
Workpiece is not
bending.
Machine capacity exceeded.
Use materials within machine’s
capacity.
Idler roll not engaging.
Inspect idler roll; make adjustments as
needed.
* WARNING: Some corrections may require a qualified electrician.
13.0 Replacement Parts
Replacement parts are listed on the following pages. To order parts or reach our service department, call 1-800-
274-6848 Monday through Friday, 8:00 a.m. to 5:00 p.m. CST. Having the Model Number and Serial Number of
your machine available when you call will allow us to serve you quickly and accurately.
Non-proprietary parts, such as fasteners, can be found at local hardware stores, or may be ordered from JET.
Some parts are shown for reference only, and may not be available individually.
Loading ...
Loading ...
Loading ...