Loading ...
Loading ...
5
4
CLEANING
Alwaysunplugthekettlefromthe
mainssupplysocketandallowitto
completelycooldownbeforecleaning
ordescalingit.Donotimmersethe
kettle,powerbaseorpowercordand
pluginwateroranyotherliquid.
1. Clean the exterior surface of the kettle
with a damp cloth and then polish with
a soft dry cloth. Do not use steel wool
pads or harsh/abrasive cleaners.
2. Descale your kettle regularly to keep
it working efciently. Use a proprietary
descaling product following the
manufacturer’s instructions carefully.
CLEANING THE FILTER
Beforeremovingorrettingthe
lter,switchoffthekettleandemptyit.
Allowittocoolcompletely,thenunplug
thepowerbasefromthemainssupply
socket.Neveroperatethekettlewithout
theltertted.
• Open the lid and remove the lter from
behind the spout.
• Rinse the lter under a tap whilst
brushing it with a soft brush.
• In hard water areas it may be
necessary to descale the lter using a
descaling product. Use a proprietary
descaling product following the
manufacturer’s instructions carefully.
• The lter may be washed safely in the
cutlery rack of a dishwasher.
• Ret the lter back into your kettle.
BEFORE FIRST USE
Remove any packaging and promotional
material from your kettle and position it on
a stable, secure, dry and level work surface
away from the edge.
Before connecting to a power source,
make sure your mains supply voltage
is the same as the one indicated on the
appliance. Connect the plug to a suitable
power outlet and make sure that the power
cord does not overhang the work surface.
Excess power cord can be stored in the
power base.
Remove the kettle from the power base
and open the lid. Fill your kettle to the
maximum mark and close the lid.
Place your kettle back onto the power
base. Switch your kettle on, allow it to boil
then discard the water. Repeat twice. This
will remove any residue left over from the
manufacturing process.
USING YOUR KETTLE
Ifthiskettleislledabovethe
maximumlevelmark,hotwatermaybe
ejectedfromthespoutduringboiling.
Bewareofsteamcomingfromthespout
orlidespeciallyduringrelling.Never
openthelidwhenthekettleisboiling.
1. With your kettle switched off, plug the
power base into a suitable power outlet.
2. Remove your kettle from the power
base before lling it with water.
3. Fill your kettle with water. You can
ll it through the spout or by opening
the lid. Don’t overll your kettle and
always ensure that there is sufcient
water in your kettle for it to operate
correctly. This is approximately 250ml
or 1 teacup full. Always check the water
level when your kettle is positioned on
its power base.
4. If opened previously, close the lid and
then switch your kettle on. Make sure
that the lid is correctly closed to ensure
safe operation.
5. When your kettle is switched on, the
on/off switch will illuminate.
6. When the water reaches boiling point,
your kettle will switch off automatically.
7. You may also switch your kettle off
manually at any time by moving the
switch to the off position.
ENERGY SAVING HINTS AND TIPS
A Breville
®
kettle, if used correctly, is a very
energy efcient device. Why not try some
of these energy saving tips:
• Only boil the water you need.
Overlling your kettle by one cup is the
equivalent to using an energy saving
light bulb for one hour!
• It is not always necessary to re-boil
your kettle. For example, one litre of
water will still be at 90°C after ve
minutes - the perfect temperature for a
cup of coffee.
IF THE KETTLE BOILS DRY
If the kettle is operated with insufcient
water a built in fail-safe device will
automatically switch it off.
• Unplug your kettle and allow it to cool.
When it has cooled down sufciently
the safety device will reset itself.
• Once the safety device has reset, rell
your kettle with cold water and use it
as normal.
AFTER SALES SERVICE &
REPLACEMENT PARTS
In the case the appliance does not
operate but is under warranty, return the
product to the place it was purchased for a
replacement. Please be aware that a valid
form of proof of purchase will be required.
For additional support, please contact our
Consumer Service Department at 0800
028 7154 or email:
TROUBLESHOOTING
For troubleshooting and FAQs visit:
www.breville.co.uk/faqs
VKT221_VKT222_VKT223_VKT226_21EM2 (UK).indd 4-5VKT221_VKT222_VKT223_VKT226_21EM2 (UK).indd 4-5 2021/9/9 上午10:472021/9/9 上午10:47
Loading ...
Loading ...