Loading ...
Loading ...
Loading ...
MS315, MS415, and MS417 network/ports menus
Standard Network or Network [x] menus
Note: Only active ports appear in this menu.
Use To
Energy Ecient Ethernet
Enable
Disable
Set the printer Ethernet connection to a energy‑saving mode.
Note: Enable is the factory default setting.
PCL SmartSwitch
On
O
Set the printer to automatically switch to PCL emulation when a print job
requires it, regardless of the default printer language.
Notes:
• On is the factory default setting.
• When O is used, the printer does not examine incoming data. The
printer uses PostScript emulation if PS SmartSwitch is set to On. It uses
the default printer language specified in the Setup menu if PS
SmartSwitch is set to
O.
PS SmartSwitch
On
O
Set the printer to automatically switch to PS emulation when a print job requires
it, regardless of the default printer language.
Notes:
• On is the factory default setting.
• When
O
is used, the printer does not examine incoming data. The
printer uses PCL emulation if PCL SmartSwitch is set to On. It uses the
default printer language
specified
in the Setup menu if PCL SmartSwitch
is set to O.
NPA Mode
O
Auto
Set the printer to perform the special processing required for bidirectional
communication following the conventions defined by the NPA protocol.
Notes:
• Auto is the factory default setting.
• Changing this setting from the control panel, and then exiting the menus
causes the printer to restart. The menu selection is then updated.
Network Buer
Auto
3KB to [maximum size allowed]
Set the size of the network input buer.
Notes:
• Auto is the factory default setting.
• The value can be changed in 1‑KB increments.
• The maximum size allowed depends on the amount of memory in the
printer, the size of the other link buers, and whether Resource Save is
set to On or O.
• To increase the maximum size range for the Network Buer, disable or
reduce the size of the parallel, serial, and USB buers.
• Changing this setting from the control panel and then exiting the menus
causes the printer to restart. The menu selection is then updated.
Understanding the printer menus 92
Loading ...
Loading ...
Loading ...