Loading ...
Loading ...
3
ASSEMBLY INSTRUCTIONS
Unpack your heater and nd the wheel-holding plate and buttery nuts between the
ns assemblies .
1. Make sure the heater is unplugged and in the "OFF" position.
2. TURN THE HEATER UPSIDE DOWN.
3. Attach the wheel-holding plates onto the heater as Fig.1 shows . The U plate is
xed between the last tow ns and the other one is xed under metal control
box. Fix the castors to the vertical axis of both the wheel holding plates.
4. Insert the buttery nuts and tighten them securely.
5. TURN THE HEATER UPRIGHT. Your heater is now ready to use.
WARNING: Risk of fire. Do not operate heater without wheel assemblies
attached. Operate heater in upright position only (wheels on bottom,
controls on top). Any other position could create a hazardous situation.
Ensure that the surface beneath the heater is clean and free of any
obstructions. It is not recommended that this heater be placed on high-
pile carpeting or any other surface that impedes the flow of air underneath
the heater.
This heater include an a visual alarm to warn that parts of the heater are
getting excessively hot. If the alarm flashes, immediately turn the heater
off and inspect for any objects on or adjacent to the heater that may cause
high temperatures. DO NOT OPERATE THE HEATER WITH THE ALARM
FLASHING.
Buttery nuts
Wheel-holding Plates
Metal control box
Fig. 1
Wheel-holding plates
Vertical axis
Roll caster
LLR33568_Assembly_Instructions.indd 3 5/26/15 5:33 PM
Loading ...
Loading ...
Loading ...