Loading ...
Loading ...
Loading ...
These lights show which portion of the cycle the washer is
operating. They also indicate when you can add an additional
item to the wash cycle and when the controls are locked.
STATUS
ADDAGARMENTO
SOAK/ PREWASH•
WASH •
RINSE•
SPiN®
CIOTHESCLEAN 0
CONIROLLOCKEDO
DOORLOCKED0
Adding items
This washer allows an 8-minute period in which forgotten
garments may be added to the load. You can add items to the
washer if the ADD A GARMENT status light is glowing.
To add items
1. Select PAUSE/CANCEL once. The washer door unlocks, and
items can be added.
2. To continue the cycle, close the door and select and hold
START (for approximately 1 second).
3. To unlock the door after the Add a Garment period, press
PAUSE/CANCEL twice. This will cancel the Wash Cycle.
Clothes Clean
The Clothes Clean light stays on after the cycle is completed,
until the door is opened. The washer will then power down.
Locking controls
The Control Lock prevents unintended use of the washer. You
can also use the control lock feature to prevent unintended cycle
or option changes during a cycle. When CONTROL LOCKED is
lit, all buttons are disabled except for Pause/Cancel and Start.
You can lock the controls while the washer is operating.
To lock the controls
Select and hold DRAIN & SPIN for 3 seconds.
DRAIN& SPIN
PRESS & HOID 3
SECONDS ]0 IOCK /
UNLOCK CON rR01
The CONTROL LOCKED status light glows.
To unlock the controls
Select and hold DRAIN & SPIN for 3 seconds until the CONTROL
LOCKED Status light turns off.
Door Locked
When the status light glows, the door is locked.
Estimated Time Remaining
The cycle times vary automatically based on your water pressure,
water temperature, detergent, and clothes load. The cycle time
will be extended if oversudsing occurs or the load is unbalanced.
The SUDs routine removes extra suds and assures proper rinsing
of your garments. During the unbalance routine, the time
displayed may pause until this activity is complete, then resume
with the remainder of the cycle.
Wash Cycles
Choose Wash Cycles by selecting the button next to the desired
cycle. Each cycle is designed for different types of fabric and soil
levels.
WASH CYCLES
NORMAL
CASUAL
HEAVYL
DUTY t_
BULKY/ BEDDING
EXPRESSWASH
KiDSWEAR
SANITARY
Each cycle has a preset Soil Level (cycle time), Water
Temperature and Spin Speed and may have preset Options.
The preset settings provide the recommended fabric care for
the selected cycle.
The preset settings can be changed anytime before START is
selected. Not all Options and Modifiers are available with all
cycles. (To change settings after the cycle has started, select
PAUSE/CANCEL once, then select the desired settings.
Select and hold START [for approximately 1 second] to
continue the cycle.)
15
Loading ...
Loading ...
Loading ...