Loading ...
Page 1/2
Factory Reset
Using The Multi-Function Button
Left for Previous/Right for Next
Calls-Answer/End Calls or Switch Between Calls
Calls-Press and Hold For 1 Second Will Reject Call
Tap the MFB 3 times
Music-Play/pause
Follow the 2-Step Process to perform a Factory Reset.
IMPORTANT: You MUST turn OFF the earbuds rst, before you RESET
them. The Factory Reset is a 2-Step Process.
Step 1: TURN OFF
Action: Hold MFB buttons for 3-4 seconds.
Result: (LED Lights will blink signalling the earbuds are
OFF).
Step 2: RESET
Action: Hold MFB buttons for 10-15 seconds.
Result: (LED Lights will turn on, blink, then eventually
stop).
COMPLETE
Earbuds are now RESET and enter OFF state.
IMPORTANT: Please remember to DELETE your previ-
ous pairing history BEFORE you perform a Factory
Reset. The Factory Reset DOES NOT remove pairing
history.
FAQ
Q: What if I cannot nd “XClear X1” in the Bluetooth Page?
Reason 1: Earbuds are paired to another device.
Solution: Turn OFF Bluetooth on the mistaken devices to disconnect the Earbuds. Then, pair
to your preferred device.
Reason 2: Earbuds reached 0% battery life.
Solution: Place both Earbuds into Charging Case and close it. Then, charge Earbuds for 5 mins.
If Charging Case has low battery, use Micro USB Cable to charge it as well.
Reason 3: Earbuds are OFF.
Solution: Press and hold MFB’s for 3-4 secs. to turn ON the Earbuds.
Q: Why won’t the Left and Right Earbud sync? Why is sound only emitting from one Earbud?
What if there are 2 “XClear X1” choices on the Bluetooth page?
Solution: Complete the following process: Turn OFF Earbuds (hold MFB’s for 3-4 secs.). Turn
ON Earbuds (hold MFB’s for 5 secs.). Voice prompt will say “Pairing”. White & Red LED Lights will
ash slowly. Double tap MFB’s (both L/R). LED Lights will ash faster. Once LED Lights ashing
slows, the synching process is complete.
X CLEAR
X CLEAR X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR