Loading ...
Loading ...
Loading ...
Configuring DSC NMEA Transmissions
You can filter the types of DSC-call data the radio sends to a connected NMEA 0183 device or over a NMEA
2000 network.
1 Select MENU > COMMUNICATIONS > DSC OUTPUT.
2 Select an option:
• To send NMEA data when you receive a DSC call from any MMSI number, select ALL VESSELS, and
proceed to the last step.
• To disable sending NMEA data when you receive a DSC call, select NO VESSELS, and proceed to the last
step.
• To send NMEA data only when you receive a call from a vessel in your directory, select SELECT VESSELS,
and proceed to the next step.
NOTE: When you configure the radio for SELECT VESSELS, all received DSC-distress-call data is sent over
NMEA, even if the vessel is not in your directory.
3 Select a vessel in your directory.
4 Select an option:
• To send all DSC-call data from this vessel, select ON.
• To send DSC-distress-call data only from this vessel, select OFF.
5 Repeat this process for each vessel in your directory.
6 Select BACK to save your changes and exit the menu.
System Settings
Select MENU > SYSTEM.
DISPLAY: Sets the backlight and contrast levels.
BEEPER: Sets the volume or disables the beeper tone that sounds when you press a key or turn a dial.
AUTO POWER-ON: Sets the radio to turn on automatically when it receives power.
LANGUAGE: Sets the language for the radio.
INT GPS SETUP: Turns on or off the internal GPS antenna.
Number Settings
You can customize the numbers shown on the home screen of the radio.
Select MENU > SYSTEM > NUMBERS.
LAT/LONG: Shows or hides the latitude and longitude numbers provided by the GPS position, or from manually-
entered position data.
TIME: Shows or hides the time provided by the GPS acquisition, or from manually-entered information.
NOTE: The time updates automatically only if you acquire a GPS position. When you enter your time and
position manually, the time shown does not update automatically. For manually entered position and time
data, the time of entry is always shown on the home screen, even if you hide the time with this setting.
COG/SOG: Shows or hides course-over-ground (COG) and speed-over-ground (SOG) information.
NOTE: You must acquire a GPS position to show course-over-ground (COG) and speed-over-ground (SOG)
information.
System Settings 23
Loading ...
Loading ...
Loading ...