Loading ...
Loading ...
Loading ...
5
Getting to know your appliance
The instruction manual is the same for various different hobs.
An overview of the models with their dimensions is given on
page 2.
The control panel
Notes
■ When you touch a symbol, the respective function is
activated.
■ Always keep the controls dry. Moisture reduces their
effectiveness.
■ Do not pull pans close to the displays and sensors. The
electronics could overheat.
The hotplates
Residual heat indicator
The hob has a two-stage residual heat indicator for each
hotplate.
If
• appears in the display the hob is still hot. It may be used,
for example, to keep a small meal warm or to melt cooking
chocolate. As the hotplate cools down further, the display
changes to
œ. The display remains lit until the hotplate has
cooled sufficiently.
Setting the hob
This section informs you how to set the hotplates. The table
shows heat settings and cooking times for various meals.
Switching the hob on and off
You can switch the hob on and off with the hotplate controls.
When the hob is switched on, the heat setting display lights up.
Setting a hotplate
Adjust the heat setting of the hotplates using the hotplate
controls.
0 = hotplate off
Heat setting 1 = lowest setting
Heat setting 9 = highest setting
There is an intermediate setting between each heat setting. This
is identified by a dot.
Note: Hotplate temperature is regulated by the heat switching
on and off. The heat may also switch on and off at the highest
setting.
Displays
‚-Š
Heat settings
•/œ
Residual heat
‘
Electronic boil start control
Controls
D
Childproof lock
ð
Activation of dual-circuit hotplate
î
Activation of extended cooking zone
Controls
Hotplate Activating and deactivating
$
Single-circuit hotplate
ð
Dual-circuit hotplate
Touch the
ð symbol
î
Extended cooking zone
Touch the
î symbol
When the hotplate is activated: the corresponding indicator lights up.
When the hotplate is switched on: the last selected size is automatically selected again
Loading ...
Loading ...
Loading ...