Loading ...
Loading ...
Loading ...
Recheck Rear-Facing
Level Line
Redo the installation if the
car seat is not reclined
correctly for your child.
continued on next page
33
Finished!
Check the tightness of the
install often to make sure it
has not loosened.
11
34
2
Locate Rear-Facing Belt
Path
Thread the connector without
the adjuster closest to it
through the
Rear-Facing Belt
Path
opening as shown.
Before you begin installing the seat
into your vehicle, did you check:
Your child’s weight and height?
4-40 lb (1.8-18 kg) and
19-40 in. (48-101.6 cm)
Your child’s fi t? See page 11.
Do you need to make adjustments to the
harness/headrest height or the buckle position?
Remove Lower Anchor Belt
from Storage Location
Or if the lower anchor belt
was used Forward-Facing,
remove it from the Forward-
Facing Belt Path so both
connectors are on the same side
of the seat.
Rear-Facing LATCH:
Lower Anchor Install
1
Adjuster
NOTE: You may need to place a
tightly rolled towel(s) or foam pool
noodle(s) under the front of the
base to help achieve the correct
recline.
Check often to be sure padding is
still in place and the belt is tight.
Loading ...
Loading ...
Loading ...