Cisco CBS250-8PP-E-2G User Manual

Loading ...

Get Congured

Get Connected

Cisco Business 250 Series Smart Switches | Quick Start Guide

To view a list of Cisco trademarks, go to this URL: https:// www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners.

The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1110R)

For Cisco support and additional documentation, including mounting instructions and the

Administration Guide, visit https://cisco.com/go/cbs250.

The switch will attempt to acquire an IP address if there is a DHCP server in the network. If the switch cannot

acquire an IP address through DHCP, it uses the factory default IP address of 192.168.1.254, with a subnet mask

of /24.

●

If the switch is using the factory default IP address of 192.168.1.254/24, you must choose an IP address for the

computer in the range of 192.168.1.2-192.168.1.253 that is not already in use.

Open a web browser window.

Enter the switch IP address in the address bar and press Enter. For example, http://192.168.1.254.

The Switch Login Page displays.

Enter the default login information:

●

Username is cisco

●

Default password is cisco

(passwords are case-sensitive)

Click Log In.

You are now ready to congure the switch. Refer to the Administration Guide for further information.

Preparing Your Switch

Using the Mobile app: Connect the switch to an existing wireless network. This could be a wireless access point

(shown above), wireless router, or mesh extender. You will need something to act as your DHCP server (a router or

switch as shown above). Once connected, proceed to the “Get Congured” section to download the app.

Using the Web User Interface (UI): Connect a computer via Ethernet cable to one of the switch ports. Make sure your

computer is on and proceed to Web UI Setup instructions under the “Get Congured” section.

LED Functions

LED OFF

GREEN

STEADY

GREEN

FLASHING

AMBER

System

LINK/ACT

PoE*

Gigabit*

Switch has acquired an IP

address through DHCP or a

static IP address has been

manually congured.

Link between corresponding

port and another device

detected.

1000Mbps link is established.

Booting, performing self-tests,

acquiring IP address, or factory

default IP address is being used.

Port is passing trac.

Flashing,

hardware failure detected.

Steady

Power is being supplied

to a device connected to

the port.

Switch is powered o.

Link down.

Power is not being supplied

or nothing is connected to

the port.

Connection speed is under

1000Mbps or nothing is

connected to the port.

Alternative: Web UI Setup

Mounting

For detailed mounting instructions, please see the “Get Support” section.

* Depending on model. PoE switches will only have a PoE LED whereas non-PoE switches will have a Gigabit LED.

Cisco CBS250-8PP-E-2G Business Smart Switch, 8 Port GE, Partial PoE, Ext PS, 2x1G Combo, Limited Lifetime Protection -NA

User Manual - Page 5