Loading ...
Loading ...
Loading ...
Help Guide
Wireless Speaker
SRS-XE300
How to care for the speaker
Although the fabric part of the speaker has water repellent treatment applied, you can use the speaker more comfortably
and for a longer period of time by following the maintenance procedure below.
If the surface of the speaker gets dirty in the following cases, wash the speaker with fresh water (tap water, etc.)
promptly to remove the dirt. Leaving dirt on its surface may cause the surface to discolor or deteriorate, or the
speaker to malfunction.
Ex.
When the speaker has sand, salt (chlorine), or other residue on it after having been used in a mountain area, by a
swimming pool, etc.
When the speaker is stained with foreign substances (sunscreen, suntan oil, etc.)
Wipe off the moisture on its surface, and put the speaker on a dry soft cloth to drain the collected water inside the
speaker. Then, dry the speaker in an airy place until no moisture remains.
The sound quality may change when water enters the speaker section or passive radiator section(
) of the
speaker. It is not malfunction. Wipe off the moisture on its surface, and put the speaker on a dry soft cloth to drain the
collected water inside the speaker. Then, dry the speaker in an airy place until no moisture remains.
Note
If the surface of the speaker gets dirty, do not use detergent, thinner, benzine, alcohol, etc. to clean the speaker because it will
affect the water repellent function of the fabric part of the speaker.
Especially in cold regions, be sure to wipe off the moisture after using the speaker. Leaving moisture on its surface may cause
the speaker to freeze and malfunction.
If sand grains, etc. enter the fabric or other part of the speaker, remove them carefully. Never use a vacuum cleaner, etc. on the
speaker. It may cause damage of the speaker section or other part of the speaker.
5-038-100-11(1)
Copyright 2022 Sony Corporation
74
Loading ...
Loading ...
Loading ...