Loading ...
Loading ...
Loading ...
Operating your Fan
WARNING: Keep all objects at
least 1 metre from the front, sides and
rear of the appliance
The fan can be operated by the manual controls
located on the top of the fan (as shown below
or by the remote control.
Fan control
Place the Fan on a dry, level and sturdy surface.
Plug the power cord into the socket.
POWER: Turn the FAN on by pressing the
‘POWER’ button; Turn the FAN off by pressing
the ‘POWER’ button again.
SPEED: You can adjust the fan speed to the
desired level: low, medium, or high by pressing
’SPEED’. The speed setting is displayed on the
display panel.
MODE: Pressing the ’ MODE’ button will set the
FAN into NORMAL (NM), NATURAL (NT), and
SLEEP (SL) mode.
The display will indicate the mode selected.
Always choose a safe location for the fan, keeping in mind the safety precautions outlined.
Ensure all packaging has been removed from the unit before use. This appliance requires
no installation, it should be used solely as a portable appliance.
TIMER: The fan is equipped with a timer that
allows you to set it's length of operation from
0.5 hour to 7.5 hours.
To set the timer, turn the unit on at the
required speed, press the timer button until
the desired run time is illuminated on the
display. The fan will turn off once the time
has elapsed.
OSC: Pressing the ‘OSC’ button will start and
stop the oscillation function. The symbol is
displayed on the LED panel.
Remote Control
All the above functions can be controlled by
the remote control. The remote control uses
a CR2025 lithium coin cell battery.
To install, remove the battery cover on the
bottom of the remote. Remove any plastic
protection from the battery and install with
the “+” side facing up. The remote requires a
line of sight path for the signal to be received
by the unit.
It the remote no longer works, replace the
battery.
IMPORTANT! NEVER COVER THIS APPLIANCE!
Loading ...
Loading ...