Loading ...
Loading ...
Loading ...
Connectthe Tubingto the Refrigerator
Before making the connection to the refrigerator, be sure the
refrigerator power cord is not plugged into the wall outlet.
We recommend installing a water fiher if your water supply has sand or particles
thai could clog the screen of the refligerator's water valve. Install it in the water
line near the refligerator.
} Remove the plastic flexible cap flom the water valve.
Place the compression nut and femfle (sleeve) onto the end of the ml)ing as
Insert.... the end of the copper tubing into the watervalve, connection as far as
......................possible. _#l_lle holding the tubing, tighten the fitting.
Fasten the copper tubing into tl,e clamp provided to hold it in a vertical
position. You may need to pD_open the clamp.
Tubing(;lamp
1/4" CopperTubing
_ _.__r Ferrule(sleeve)
1/4" CompressionNu_ .
igeratorConnection
Turnthe Water Onat the Shutoff Valve
Tighten any connections thai leak.
Plug In the Refrigerator
Arrange the coil of copper tubing so that it does not vii)rate against the back of
the retiigeralor or against the wall.
Push the retiigeralor back to the wall.
Start the Icemaker
Set the icemaker teeler arm to the ON (do_m) position. The icemaker _dll
not begin to operate until it reaches ils operating temperature of 15°F. (41°C.)
or below. It xdll then begin operauon aulomaucally if the icemaker reeler man
is in the ON (do_) position.
NOTE."Theicemakermaydouble-cyclewhenit firststarts,causingsomewaterspillagefrom
theicemakerinto the icebucket Thisis normalandshouldnothappenagain.
23
Loading ...
Loading ...
Loading ...