Loading ...
2
ENGLISH
Symbols
The followings show the symbols used for the equipment. Be sure that you understand their meaning before use.
• Charging. • Ready to charge.
• Delay charge (Battery cooling,
too cold battery, or waiting for
charging).
• Charging complete.
• Conditioning • Defective battery.
• Do not short battery.
• Cooling abnormality.
• Do not expose battery to water or
rain.
• Do not destroy battery by re.
• Read instruction manual. • Always recycle battery.
Specication:
Model DC18RE
Input A.C. 120 V 50–60 Hz
Output For LXT battery D.C. 14.4 V–18 V
For CXT battery D.C. 10.8 V–D.C. 12 V (max.)
Weight 1.2 kg (2.7 lbs)
• Due to our continuing program of research and development, the specications herein are subject to change without
notice.
• Specications may differ from country to country.
• Weight according to EPTA-Procedure 01/2014
IMPORTANT SAFETY INSTRUCTIONS
CAUTION:
1.
SAVE THESE
INSTRUCTIONS
– This manual contains important
safety and operating instructions
for battery charger.
2. Before using battery charger, read all
instructions and cautionary markings
on (1) battery charger, (2) battery, and
(3) product using battery.
3. CAUTION – To reduce risk of injury,
charge only Makita type rechargeable
batteries. Other types of batteries may
burst causing personal injury and
damage.
4. Non-rechargeable batteries cannot be
charged with this battery charger.
5. Use a power source with the voltage
specied on the nameplate of the
charger.
6. Do not charge the battery cartridge
in presence of ammable liquids or
gases.
7. Do not expose charger to rain, snow,
or wet condition.
8. Never carry charger by cord or yank it
to disconnect from receptacle.
9. After charging or before attempting
any maintenance or cleaning, unplug
the charger from the power source.
Pull by plug rather than cord whenever
disconnecting charger.
10. Make sure cord is located so that it
will not be stepped on, tripped over,
or otherwise subjected to damage or
stress.
11. Do not operate charger with damaged
cord or plug. If the cord or plug is
damaged, ask Makita authorized
service center to replace it in order to
avoid a hazard.
Loading ...
Loading ...
Loading ...