Loading ...
Loading ...
Loading ...
35
MAINTENANCE
ENGLISH
NOTE
• Depending on the amount of water inside the
machine, you may have to empty the water
collection container a few times
3
Remove any foreign materials from the filter
with a soft brush.
4
After cleaning, re-fit the filter by inserting it and
turning clockwise.
5
When closing the pump cover, ensure that the
mountings inside the cover meet the holes on
the front panel side.
6
Close the filter cover.
CAUTION
• Be careful when draining, as the water may be
hot.
Cleaning the Dispenser Drawer
Detergent and fabric softener can build up in the
dispenser drawer. Liquid detergents can remain
under the dispenser drawer and not dispense
completely. Remove the drawer and inserts and
check for build-up of cleaning products
every 2
months
.
1
Pull the drawer forwards until it is fully
extended.
2
Press the region shown below inside the
detergent drawer you have pulled all the way
back, and continue pulling and remove the
detergent drawer from its place
3
Remove the detergent drawer and
disassemble the flush stopper. Clean
thoroughly to completely remove any softener
residue. Refit the flush stopper after cleaning
and check that it is seated properly.
4
Rinse with a brush and lots of water. Collect the
residues inside the detergent drawer slot so
that they don’t fall inside your machine.
5
Wipe any moisture with a dry towel or cloth
after cleaning.
6
Reassemble the components of the drawer to
the proper compartments and insert the
detergent dispenser drawer.
Loading ...
Loading ...
Loading ...