Ancona AN1568 User Manual

Loading ...

— 14 —

STEP 14

Connect to AC

• ConnectACplugintoagroundedACoutlethaving120V,60Hz.Placetheoutletatamaximumdistanceof33-1/2in.

(851 mm) from where the cord exits on the hood.

3-Pronged Plug

Ground Plug

3-Prong Receptacle

Installation

Figure 7

STEP 13

Install Chimney

• Place chimney on top of the main housing.

• Remove the protective coating from the upper chimney. Carefully slide the upper chimney down into the lower chimney.

• Use two screws to x the two chimneys together with the lower chimney bracket, make sure upper chimney is moving

freely (see Figure 6).

• Screw the upper chimney to the upper mounting bracket (see Figure 7).

Figure 6

STEP 12

Connect Ductwork

• Attach ductwork to damper. Secure the ductwork with duct tape to make sure joints are secure and air tight.

• Donotinstalltheducttapetootightlyasthismaypreventthedamperapsfromopeningwhichwilloverworkthemotor

and cause improper functioning of the unit.

• Fasten all connections with sheet metal screws and tape all joints with certied aluminum or foil tape. Use caulking to

seal exterior wall or roof opening around the cap.

Loading ...

Ancona AN1568 30 Inch Stainless Steel Convertible Chimney Style Wall Mount Hood