Loading ...
Loading ...
Loading ...
Strength Training Collection 9 8 IntensiFlex Max User Manual Lifepro
5-MINUTE ASSEMBLY GUIDE
ATTACH THE ADJUSTMENT
POSTS TO THE STABILIZERS
1. Gather the two stabilizers (A), two adjustment posts (B), four sets of
hardware (one M10×65mm bolt, one washer, and one nut) (E), and the
wrenches (F).
2. Remove the washer and nut from each bolt.
3. Align the holes in the base of one post with the holes in one stabilizer.
See Figure 1.
4. Insert a bolt through each screw hole from the BOTTOM. Place a
washer and nut onto the end of each bolt and tighten with your fingers.
5. Repeat steps 3–4 above to attach the second post to the second
stabilizer.
6. Use a wrench to fully tighten all of the nuts.
Figure 1
B
Nut
Bolt
Washer
A
1
ATTACH THE
CROSSBAR
1. Gather the crossbar (C), six sets of hardware (one M10×65mm bolt,
one washer, and one nut) (E), and the wrenches (F).
2. Remove the washer and nut from each bolt.
3. Align the three screw holes on each end of the crossbar with the three
screw holes in the assembled legs.
4. Insert a bolt from the OUTSIDE. See Figure 2.
5. Place a washer and nut onto the end of each bolt and tighten the nut
with your fingers.
6. Repeat steps 3–5 above to insert the remaining five bolts.
7. Use a wrench to fully tighten all of the nuts.
2
Figure 2
C
FRONT
Loading ...
Loading ...
Loading ...