by
PKWNARA50
CONTENTS
1. Clean Before First Use
2. Specications
3. User Instructions
4. Cautions
5. Clean and Store
We suggest that you run clean water through the
Aerator before rst use. The product is designed
to seal on a standard wine bottle mouth opening
and will only push water through the tube and
spout if used in a sealed state.
SPECIFICATIONS
CLEAN BEFORE FIRST USE
SIZE
TUBE LENGTH
WEIGHT
POWER SOURCE
Φ60*162.5 mm
( Tube and Spout not included )
95-180mm
83g (Batteries not included)
2 X AAA Battery
SPECIFICATION
Mixes Wine & Air to provide a
purer wine taste & experience!
USER INSTRUCTIONS
Air Vent Tube
Dispense
Switch
Working
Light
Air Inlet
Battery
Cover
Indicator
Light
Remove the Top
Cover from the
Electronic Body
Assembly
through turning
the cover to the
right (counter
clockwise) and
pull the cover
up and o the
Electronic Body
Assembly to
expose the
battery
compartment
Insert 2 x AAA 1.5V
batteries. Follow the
polarity instruction in
the battery
compartment.
Open the bottle of
wine and insert
Electronic Wine &
Spirit Aerator tube
into the bottle and
gently press the
Aerator down over
the bottle mouth
Press the Dispense
Switch on the top
of Electronic Body
Assembly for 2
seconds to start
working
CAUTIONS
• Do not use detergents to clean the Tube.
• Remove the battery if haven't used in a long time.
• Be sure to remove the Tube Part from Aerator
before cleaning.
• This product is not a toy and contains small parts.
Not suitable for children under 5 years of age.
CLEAN AND STORE
1. After use, immediately clean and dry.
2. Wipe it clean and dry.
3. Add a little lemon juice or vinegar if
you want to improve the cleaning
eect
Remove the Tube to the spout under the
Electronic Body Assembly by turning the
tube to the right (counterclockwise) and
pull the tube down
Connect the Tube to the spout under the
Electronic Body Assembly by turning the
tube to the left (clockwise)
by
