Loading ...
Loading ...
Loading ...
8
In this mode, the interior LED light, the compressor indicator and the temperature value on the display
panel will be turned off and the ° will illuminate in the upper left corner of °C / °F.
Light / Lock
LED lamp brightness mode: with Memory IC (when the unit restarts after power failure unit will auto recover
at the last setting), the default brightness is 100%.
Each time the button is pressed, the brightness of the LED will be cycled from the four positions
(100%, 75%, 50%, OFF)
Press and hold for 3 seconds to lock or unlock the control panel.
ON/OFF Power / Mute
To turn the appliance on or off, press and hold the ON/OFF button for 3 seconds.
When the high-temperature alarm or low-temperature alarm is activated, the buzzer will sound continuously.
Press one time alarm will be closed.
LOCK
If illuminated, indicates the control panel is locked.
RUN
When unit’s compressor is running, this indicator light will illuminate to signify that cooling mode is currently in
operation.
Demo mode
Press and hold buttons , and simultaneously for 10 seconds, it can enter or exit demo
mode.
In this mode, the display panel can operate settings, but the temperature is fixed display 12°C (54°F), all
fans, the compressor does not start.
Defrosting
The unit defrosts automatically in normal operating conditions.
The evaporator behind the rear wall of the unit defrosts automatically. Water will drain through the drain pipe
from the back of the product. Users need to bring the water to the drain or find an appliance to load the
water. (If loading with an appliance, you need to pay attention to clearing the water regularly).
However, frost may accumulate on the evaporator if the unit is repeatedly opened in high heat or high
humidity location. If this frost pattern does not clear within 24 hours, your unit will require manual defrosting.
Mandatory defrost mode: Press the and at simultaneously for 10 seconds, and the appliance will
enter mandatory defrost mode.
Loading ...
Loading ...
Loading ...