Loading ...
Loading ...
Loading ...
4 • English DesignMax DM6PE • Installation Guide
PRO.BOSE.COM
Setup
Wiring the Loudspeaker
Wire Gauge
The DesignMax DM6PE loudspeaker is designed to work with 18
AWG (0.8 mm
2
) to 14 AWG (2.1 mm
2
) size wire only.
Connection Diagrams
Expose six millimeters (¼inch) of bare wire to attach to the
terminals.
Loudspeaker Settings
70V
2.5W 5W 10W 20W 40W 80W*
8Ώ
5W 10W 20W 40W 80W NC**
100V
** NC: No Connection (do not use)* Factory default
Transformer Tap Setting
Set tap by turning. Use a flat head screwdriver.
8Ω
Preparing the Input Cover
The input cover is designed for three dierent wiring scenarios. To change the configuration of the input cover to support your wiring
scenario, cut along the perforation on the rubber conduit.
Note: Indoor-only applications do not require use of the input cover.
Single In In and Out Wide Open
70/100V
8Ω
8Ω
8Ω
8Ω
Installation Options and Accessories
q Threaded Rod Adapter
w Pendant Conduit Adapter
Note: If using the wide open rubber conduit configuration, it is the installer's responsibility to seal against water ingress into the Euroblock
connector. Use outdoor or marine-grade silicone to seal all wiring connections to ensure a tight seal.
q w
Loading ...
Loading ...
Loading ...