Loading ...
Loading ...
Loading ...
÷
Air Conditioner Features
(continued)
÷
CHECK FILTER FEATURE:
CLEAN AiR FEATURE
on some modeUs):
DO THIS:
I PRESS CLEAN
tL/ AIR BUTTON
YOU WiLL SEE:
.1_.No LIGHT On
te: This feature is a reminder to clean the Air Filter (See
Care and Cleaning) for more efficient operation= The LED (light)
will illuminate after 250 hours of operation. To reset after
cleaning the filter, press the "Check Filter" button and the light
will go off.
YOU WiLL SEE:
_e LIGHT On
te: When this feature is "ON", the electronic air purifier is
rgized to remove pollen and impurities from the air=Tocancel
feature, press the Clean Air button (the LIGHT will turn
off)=
Note: This feature can be activated on the unit touchpad ONLY.
÷
REMOTE SENSING FEATURE
(on some models):
DO TH_S:
PRESS REMOTE
SENSING
BUTTON ON
YOU WiLL SEE:
jj/ii LIGHT putsing On & Off intermittently.
te: This feature can be activated from the remote control
LY, the unit must be in a cooling mode.
activate the remote sensing feature, point the remote control
ards the unit and press the remote sensing button. Next,
use the ,A ,_ buttons to set the desired temperature at the
remote. (Note that the set temperature wilI only be displayed
on the unit itself). The LIGHT on the unit control wilI pulse to
indicate it received the signal. The LIGHT on the remote control
will pulse each time it sends a signal. It wiII continue to send
this signal until the feature is deactivated by pressing the remote
sensing button. Ifthe unit does not receive the remote sensing
signal during any 3 minute interval, the unit wilI beep to indicate
the remote sensing mode has ended. The display on the remote
control indicates the temperature at the remote ONLY.
SZ000302(En)=YaoKong(1018) 9 _ 10/25/2004, 2:33 PM
Loading ...
Loading ...
Loading ...