Loading ...
Loading ...
Loading ...
To turn on a burner
After finishing cooking, turn the controls to position
0 and disconnect the appliance using the main
switch.
The main switch indicator will be turned off.
The appliance switches off automatically after 6
hours of operation. Turn all the control knobs to the
0 position and then you can turn the appliance on
again.
To turn the burners off
Connect the appliance by means of the main
switch, its indicator which will come on. Then
turn the chosen burner control to the left
(anticlockwise) to the required position. The flame
will automatically and the hotplate indicator light
will come on.
If the main switch has been pushed but no burner
ignited, the appliance will switch itself off
automatically after 3 minutes.
If the burner goes out (e.g. a draught) when in use,
the appliance will switch the hotplate on again
automatically.
If this ignition is unsuccessful (e.g. as a result of
boiled-over liquid on the burner), the flow of gas to
this burner is interrupted and the hotplate indicator
flashes. Turn the control knob to 0 and check
whether the cause can be rectified using the table
Every hotplate features a safety pilot!
extinguished by boiled-over liquid), the flow of gas
that this device is active, switch on the burner as
Safety system
Ignition sparker
on page 16.
The hob is equipped with an electronic safety system
This means that if the flame ever goes out (e.g. is
(thermocouple) that cuts off the gas when the burners
is interrupted.
are accidentally switched off. To ensure
usual.
Please note
7
Thermocouple
Loading ...
Loading ...
Loading ...