Loading ...
Loading ...
Loading ...
Operating Instructions
(continued)
TO CHANGE TEMPERATURE DISPLAY:
temp/timer
auto
hi mmed
lo
]
V ON-OFF A FANSPEED
fitter
reset
steep
YOU WILL SEE:
temp/timer
auto 1
hi _ fittermed
lo reset
V ON-OFF A FAN SPEED steep
DO THIS;
PRESSAND HOLD THE
UP/DOWN BUTTONS
TOGETHER FOR 3 SECONDS
TO TURN UNIT OFF:
temp/timer
auto 1
hi , filtermed
lo reset
V ON-0FF A FAN SPEED steep
Note: The control is capable of displaying temperature in
degrees Fahrenheit or degrees Celsius.
YOU WILL SEE:
temp/timer auto ]
lo reset
V ON=OFF A FAN SPEED s[eep
ON/OFF BUTTON
ADDITIONAL THINGS YOU SHOULD KNOW
Now thatyou have masteredtheoperatingprocedure,here are more featuresinyourcontrolthatyou shouldbecome familiarwith.
• The "Cool" circuit has an automatic 3 minute time delayed start if the unit is turned off and on quickly. /_
This prevents overheating of the compressor and possible circuit breaker tripping. The fan will continue
\
to run during this time.
It
to roll through to select another mode.
• The control will maintain the set temperature within 2 degrees Fahrenheit, between 60F and 90F degrees.
• After a power outage, the unit will memorize the last setting and return the unit to the same setting once power is restored.
There is a 2-Second delay for the compressor shutting down when selecting FAN ONLY. This is to cover the possibility of having
Fresh Air Vent Control (on some models)
The Fresh Air Vent allows the air conditioner to:
1. Recirculate inside air - Vent Closed (see Fig. 1)
2. Draw fresh air into the room - Fresh Air (see Fig. 2)
3. Exchange air from the room - Vent Open (see Fig. 3)
i
Figure 3 (VENT OPEN)
Figure 1 (VENT CLOSED)
Figure 2 (FRESH AIR)
©2009 Electrolux Home Products, [nc, All rights reserved,
9
Loading ...
Loading ...
Loading ...