Loading ...
Loading ...
Loading ...
12
6 System Settings
You can configure the general system parameters of the Camera.
Press to wake up the Camera.
On the live interface, press to enter the Menu interface. Select System Settings, and
then press to confirm.
Configure system parameters.
1) Press / to select parameters.
2) Press to confirm.
3) On the parameter configuration interface, press / to increase or decrease the
parameter value.
Figure 14-1 System settings parameters
Parameter Description
USB Option
There are two ways to connect the Camera to PC:
PC Preview Mode: Download DH Thermal to PC and connect the
camera to the PC with the USB cable. The client interface will display
the live interface of the Camera. For details on operating the client,
see DH Thermal_User's Manual.
USB Flash Drive Mode: Use a USB cable to connect camera and
computer, and transfer image/video files to the computer.
You can turn off the USB connection by pressing off to save electricity.
Laser Light
Point the laser light of the Camera at targets to view their temperature
readings in seconds
Time and Date Configure the current time (24-hour time system) and date.
Brightness
Press to configure the level (
Low
,
Medium
,
High
). The higher the
level, the brighter the screen.
Configuring higher brightness will reduce battery usage.
Auto Maintain
Auto Standby: Press to switch the time. It can be configured to
5 minutes, 10 minutes, 15 minutes, and off.
Auto Shutdown: Press and select auto turning off; press to
switch the time. It can be configured to 15 minutes, 30 minutes, 45
minutes, 60 minutes, and off.
The auto standby time must be less than or equal to the auto shutdown
time.
Restore Defaults
(Optional) Press and then
Yes
to restore to factory settings. Press
No
to cancel this action.
Press Yes , and the camera will be restored to its
factory settings. Be
cautious.
Loading ...
Loading ...
Loading ...