OLED83C3AUA Owner’s Manual

Loading ...

Connections

You can connect various external devices to the TV. For more information on

external device’s connection, refer to the manual provided with each device.

HDMI

• When connecting the HDMI cable, the product and external devices

should be turned off and unplugged.

• Supported HDMI Audio format (Depending upon model):

True HD (48 kHz),

Dolby Digital / Dolby Digital Plus (32 kHz / 44.1 kHz / 48 kHz),

PCM (32 kHz / 44.1 kHz / 48 kHz / 96 kHz / 192 kHz)

DTS (44.1 kHz / 48 kHz / 88.2 kHz / 96 kHz)

DTS-HD (44.1 kHz / 48 kHz / 88.2 kHz / 96 kHz / 176.4 kHz / 192 kHz)

Note

• If the device connected to Input Port also supports HDMI Deep Color,

your picture may be clearer. However, if the device doesn’t support it, it

may not work properly. In that case, change the TV’s [HDMI Deep Color]

setting to off.

•

→ [ ] → [General] → [External Devices] → [HDMI Settings]

→ [HDMI Deep Color]

• Use a certified cable with the HDMI logo attached. If you do not use a

certified HDMI cable, the screen may not display or a connection error

may occur.

• Recommended HDMI cable types (3m (9.84feet) or less)

- Ultra High Speed HDMI

/™ cable

USB

Some USB Hubs may not work. If a USB device connected through a USB Hub

is not detected, connect it directly to the USB port on the TV.

Note

• For an optimal connection, HDMI cables and USB devices should have

bezels less than 10 mm (0.39 inches) thick and 18 mm (0.7 inches)

width.

• Use an extension cable that supports

if the USB cable or USB

flash drive does not fit into your TV’s USB port.

IR Blaster

Control the set-top box (cable/satellite/IP/OTT), Blu-ray/DVD player,

soundbar, game consoles, etc., using the IR Blaster. (Depending upon country)

(Depending upon models)

• Connect the IR Blaster cable to the TV’s IR Blaster port.

• Use universal control settings to control the device.

• Secure the IR Blaster with the 3M tape provided.

• In order to control external devices through "Room to Room Share" and

"Hands-free Voice Control", an IR blaster connection is required.

External Devices

Supported external devices are: Blu-ray player, HD receivers, DVD players,

VCRs, audio systems, USB storage devices, PC, gaming devices, and other

external devices.

Note

• The external device connections shown may differ slightly from

illustrations in a manual.

• In PC mode, there may be noise associated with the resolution, vertical

pattern, contrast or brightness. If noise is present, change the PC output

to another resolution, change the refresh rate to another rate or adjust

the brightness and contrast on the [Picture] menu until the picture is

clear. Depending upon the graphics card, some resolution settings may

not allow the image to be positioned on the screen properly.

• When connecting to a wired LAN, use a CAT 7 cable with high-speed

Internet transmission. (Only when LAN port is provided.)

• The TV may be capable of operating without a set-top-box from a

multichannel video programming distributor (MVPD).

Remote RS-232C setup

To obtain the RS-232C external control setup information, please visit www.

lg.com. Download and read the manual, (Depending upon model).

• Do not drop the product or let it fall over when connecting external

devices. Otherwise, this may result in injury or damage to the product.

• When connecting external devices such as video game consoles, make

sure the connecting cables are long enough. Otherwise, the product may

fall over, which may cause injury or damage the product.

Loading ...

Owner’s Manual - Page 7