Loading ...
Loading ...
Loading ...
B
、
、、
、
OPERATION
Universal 5L beer keg
1. Before piercing the plug on the top of the keg, you must always follow the
instructions marked on the keg to eliminate the excess gas and ensure that the keg has
rested long enough to avoid foam coming out through the tap faucet.
2. With the keg upright, place the piercing pin against the sealant on the upper center
of the keg (you may need to tear off the marking ring or change a proper sealant),
press the piercing pin/keg lifter to poke the seat and then push the piercing pin into the
keg quickly. Press the tap mechanism until you hear a “click” sound that will indicate
the tap mechanism is fixed on the beer keg. (Show as figure 10). Make sure both sides
are securely attached.
Figure 10 Figure 11 Figure 12
3. Open the beer cooler, by pressing the door latch button, and place the assembled
keg into the cooling cavity; Connect the CO2 connector tube and beer outlet tube to the
keg lifter tube connector.
NOTES: make sure all connection of tap mechanism is well connected, and without
damage. And make sure tap valve is on close status, and the CO2 pressure regulator
knob is at “Off” status.
Figure 13 Figure 14
排水开关
Open
Close
Beer dispensing unit
Keg Seal
beer keg
Beer connector
CO2 connector
Loading ...
Loading ...
Loading ...