Loading ...
Loading ...
Loading ...
Assembly
Model 465 Shown
Discharge
Chute Chipper
Chute
Figure 7
IMPORTANT:The flail screen is located inside the
housing in the discharge area. Ifthe flail screen
becomes clogged, remove and clean as instructed in
SECTION 5: MAINTAINING YOUR CHIPPER
SHREDDER. For best performance, itis also important
to keep the chipper blade sharp.
SECTION5: MAINTAININGYOURCHIPPERSHREDDER
CustomerResponsibilities
MA,NTENANOE .J SERV,OE
SCHEDULE ..z..o_e _,_ ,e_ _ ._o_ _o DATES
Lubricate Release Bracket ,_
F-
O Lubricate Hopper Assembly
a
0 Lubricate DischargeChute q_
¢f
n Check Chipper Blade ,_ _:_
Check Oil
ChangeOil q_ ,_
uJ
Z
Clean Air Filter _
Z
uJ Clean Engine _
CheckSpark Plug ,_ q_
WARNING: Always stop engine, discon- Maintenance
nect spark plug, and ground against
engine before cleaning, lubricating or
doing any kind of maintenance on your
machine.
Lubrication
Release Rod: Lubricate the release rod and spring with
light oil once a season.
Hopper Assembly: Lubricate the pivot points on the
hopper assembly with light oil once a season.
Discharge Chute: Lubricate the pivot points on the
chute deflector with light oil once a season.
Engine: Follow the separate engine manual packed
with you unit for lubrication instructions.
Engine
Refer to the separate engine manual for ait engine
maintenance instructions.
Check engine oil level before each use as
instructed in the separate engine manual packed
with your unit. Read and follow instructions
carefully.
Clean air cleaner every 25 hours under normal
conditions or once a season. Clean every few hours
under extremely dusty conditions. To service the air
cleaner, refer to the separate engine manual
packed with your unit.
Loading ...
Loading ...
Loading ...