Loading ...
Loading ...
FIRST OPENING
3
STEP 1: Open the safe, keep the safe
opening;
STEP 2: Press the reset button (a
red button in the hinge side of the
door), the safe beeps twice, meanwhile
blue indicate light flashes twice then
keep lighting.
STEP 3: Input a new code, 3-8
digits and press # , the new code will
be confirmed by two "beep" and the
blue indicate light will flash twice then turn off.
STEP 4: Testing the code before you close the door.
SET UP THE CODE
2
NOTICE:
1 .Please use brand-new batteries ,
do not mix used batteries with new
batteries;
2 .Replace the batteries when the red
indicate light turns on, it means the
batteries are running out of power.
INSTALL BATTERIES
STEP 1: After first opening, keep the safe open and locate the battery
compartment on the hinge.
STEP 2: Prepare 4 brand-new AA batteries (not included) and insert into
the battery compartment by matching the + & - electrode;
STEP 1: Locate the 2 emergency
keys (the black key) in the same bag
as the instruction booklet.
STEP 2: Locate the emergency key
hole by pushing the left side of the
emergency lock cover;
STEP 3: Align the emergency key
with the key hole and fully insert, turn
the key counterclockwise to the limit,
and hold on it.
STEP 4: At the same time, rotate the knob clockwise to open the safe.
STEP 1: Open the safe, keep the safe
opening;
STEP 2: Press "0" twice and then
press the reset button (a red button
in the hinge side of the door), the safe
beeps three times, meanwhile blue
indicate light flashes three times then
keep lighting.
STEP 3: Input a new code, 3-8
digits and press # , the new code will
be confirmed by two "beep" and the blue indicate light will flash twice then
turn off.
STEP 4: Testing the code before you close the door.
SET UP SECOND CODE
NOTICE:
1 .10 seconds without any operation after pressing the reset button, it will go
back to standby mode, you need to retry from "STEP1";
2 .Please set up both of two codes immediately after receiving the safe.
The default code is "159".The safe can be set with
two codes.
SET UP FIRST CODE
NOTICE:
1.When you rotate the knob clockwise, you must have the
key fully inserted and turned counterclockwise to the limit, keeping the key until
the safe unlocked and opened.
2.Please keep the keys in a secure place, do not lock the keys inside the safe.
Loading ...
Loading ...