Loading ...
Loading ...
Loading ...
sharkclean.comsharkclean.com
1. With the dust cup open and the power o, press
the filter release latch below the handle and pull
out the filter housing.
2. Press the tabs on both sides of the filter housing
and pull out the filter. To clean the filter, hand-
wash only with water and let air-dry for 24 hours
before reinstalling. To reinstall the filter, slide
it back into the housing, then slide the housing
back into place.
MAINTAINING YOUR VACUUM
NOTE: Do not wash any parts or accessories in a dishwasher.
1. With the power o, slide the release button
forward, and the dust cup will swing open. Tap
the filter screen lightly to knock o dust and debris.
2. Wipe the screen inside the dust cup lightly with a
dry cloth to remove dust and dirt.
EMPTYING THE DUST CUP
1 2
1 2
MAINTAINING YOUR VACUUM
4
3. To deep-clean the dust cup, open the dust cup 90
degrees until it clicks open. Lift the Cyclone Filter
out, using the wire handle on the frame. Rinse the
dust cup with water, and wipe clean with a damp
cloth. Allow to air-dry completely (approximately 24
hours).
4. When the dust cup is completely dry, slide the
cyclone filter back into place. Tuck the wire handle
away, then reinstall the dust cup.
CLEANING THE DUST CUP AND FILTER
3
Loading ...
Loading ...
Loading ...