Loading ...
Loading ...
Loading ...
USING YOUR SMART ROBOT VACUUM CLEANER
• On low power, the “ ” button light will keep blinking.
• When charging, it will keep blinking.
• When fully charged, it will be lit.
• Before rst use, charge the robot for 6 hours.
• Fully charge after each use.
• If the machine will not be used for a long time, charge every 2 months to ensure
good operation of the battery.
CLEANING AND MAINTENANCE
1. Side Brushes
If side brushes are dirty, please wash them with clean water and the use them
after they get dry naturally. If they are damaged and cannot work normally,
please change them.
• When changing side brushes, refer to the "L" and "R" on the side brushes and
indicated on the base of the machine respectively.
• Wash side brushes after cleaning to ensure normal operation.
2. Cleaning the Dustbin and Strainer
A. Remove the cover as instructed.
B. After taking out the dustbin, please check if the suction channel of the host is
obstructed by foreign matters and also clean it up.
C. Remove the main strainer.
D. Remove the preliminary strainer.
E. Lower the dustbin until dust pours out.
F. Clean dustbin, preliminary strainer and main strainer. It is best to clean after
15- 30 days’use. The life span of the main strainer is approximately 24 months.
G. Reassemble correctly to avoid damage to the machine.
J. Remove the mop from mop holder.
Do not use brush or water: Knock gently or use a dryer to loosen dust.
• Clean dustbin and suction channel after each use.
• After washing components, allow to dry naturally, but do not let dry in
sunshine. Replace in machine after drying to ensure good operation.
www.SereneLifeHome.com
12
Loading ...
Loading ...
Loading ...