Loading ...
Loading ...
Loading ...
@
MOUNTING LOWER DOOR
items Needed:
Plastic Rivet (Qty: 11)
#14 - 10 x 5/8 Hex Washer Screw (Qty: 2)
Short Hinge Pin (Qty: 2)
PrOCeSS:
- Attach lower door assembly to unit as shown, using (2)
short pivot pins and (2) screws.
- Wrench tighten screws. Do not overtighten.
- Close canopy and test lock.
Short Pivot Pin
\
Screw
Lower Door
Assembly
MOUNTING CANOPY TO CABINET
items Needed:
Hote Template
PrOCeSS:
NOTE: To prevent drilling into the metal cabinet top,
take the removable top off of the cabinet or move
the part to be dallied away from the meta_ cabinet top
before drilling.
Mark centers of clearance holes to be drilled in
removable cabinet top using template provided.
Atign corner (A) of the template and mark the holes
tabeted (1). Corner A
Front of Cabinet
Align corner (B) of the template and mark the holes
tabeted (2).
Corner B
NOTE: To install plastic rivet, fully seat the rivet in the
ho_e then depress the plunger to ho_d in place.
Instait (4) plastic rivets in the front flange of each side
on the unit as shown.
install (3) plastic rivets in hotes along bottom edge of the
tower door as shown.
Front of Cabinet
Align corner (C) of the template and mark the holes
tabeted (3).
Corne_
Front of Cabinet
Align corner (D) of the template and mark the holes
tabeted (4).
L.___ Front of Cabinet
Loading ...
Loading ...
Loading ...