Loading ...
Loading ...
Loading ...
MOTU PRO AUDIO CONTROL WEB APP
14
DEVICE TAB (CONTINUED)
Scroll down to view these additional
Device tab settings.
25. In the Computer Setup section, you
can specify how many audio
channels you would like to be able to
stream to and from your computer,
up to 64 channels each way, simul-
taneously, over USB. Map them as
desired in the Routing tab
(page 15).
26. When the Computer Volume Controls
option is enabled (a Mac only
feature), the Audio MIDI Setup
utility in OS X provides volume
control for each output channel to
your MOTU audio interface. In
addition, the volume controls for
your Mac (on your computer
keyboard) will control the channels
you’ve designated for computer
output in Audio MIDI Setup, if any.
Be careful when toggling this
setting because sudden changes in
your computer volume can result.
27. Click Reboot to restart the interface.
28. Use these buttons to manually check
for and install updates for your
MOTU interface. For complete
details, see Appendix D, “Updating
Firmware” (page 103). Updating
from a file can be done offline from
your computer, using an update
you’ve obtained through MOTU’s
web site or tech support depart-
ment. The Check For Updates button
requires that the computer (or
device) you are using to view your
MOTU interface is connected to the
internet through a local network or
Wi-Fi. Updating from the internet is
easy and convenient.
29. The System Information section
displays information about your
MOTU device, including the
firmware version and network IP
address.
30. Use Restore Factory Presets to restore
your MOTU device’s factory presets.
31. Use Set Password to password-
protect the interface on the
network. All settings are blocked,
except for aux bus mixing, as shown
above (31). This allows musicians to
access their personal monitor (aux)
mixes from their mobile devices,
while all other device settings
remain blocked. To clear the
password, log in and then click Clear
Password. If you forget the
password, you can clear it in the
Settings menu in the front panel LCD
(see page 54) with either the Clear
Password setting or by doing a
factory reset with the Factory
Default setting.
27
31
29
28
30
26
25
Loading ...
Loading ...
Loading ...