Loading ...
Loading ...
Loading ...
REMOVING AND REPLACING REFRIGERATOR DOORS (models with water dispenser)
1.Removing Refrigerator Door
NOTE: Handle appearance may vary.
IMPORTANT: Before you begin, turnthe refrigerator OFF and unplug it. Remove food and any bins from doors.
•Left Door
• Loosen the screws and remove the cover on back side (see figure A).
• Disconnect water supply tube by pushing back on the disconnect ring (3).
. Loosen the cover screws (1).
•Disconnect door switch wire (2).
° Pull out the tube (4).
[] CAUTION: If a tube end is deformed or worn out, cut the damaged portion away.
•Disconnect wire harness (5).
• Loosen screws (6) and lift off the top hinge (7).
Place the door on a non-scratching surface with the inside up.
[] CAUTION: When removing top hinge, be careful that the door does not fall forward.
•Right Door
•Loosen the cover screw (1).
• Disconnect door switch wire (2).
• Disconnect wire harness (4).
Remove the ground screw (8).
•Loosen screws (6) and lift off the top hinge (7).
•Place the door on a non-scratching surface with the inside up.
(1)
(
_---.....
_i ::::::.(2)
(5)
(7)
./
J
J
S
Figure A "'%
11
Loading ...
Loading ...
Loading ...