Loading ...
Loading ...
Loading ...
Dispose of the battery
· The battery must be brought to a household hazardous waste collection site for proper
handling.
SETUP OPTIONS FOR IMPROVED AIR CIRCULATION
This fan has 3 functions which will allow you to better customize your preferred air comfort
as well as improve air circulation in the room.
A. OSCILLATION:
To activate the oscillation function for widespread breeze distribution, press the button.
To turn off the oscillation function for a targeted breeze setting, press again. Controlling the
oscillation can be done while the fan is operating. This fan has an enhanced oscillation angle
of 120 degrees for better circulation.
B. TILT:
To tilt the fan head so that the breeze is targeted at an angle, turn the fan off and steady the
motor housing of the fan with one hand and grip the fan grille with another. Carefully tilt the
head of the fan as depicted in until it reaches the desired angle. Be careful as to not tilt the
head back further than it is intended to go, doing so will damage the unit. The maximum tilt
is almost to the horizontal position.
NOTE: The fan must be turned off when performing this adjustment.
C. HEIGHT ADJUSTMENT FOR FLOOR CONVERSION:
To adjust the height of the fan, turn the fan off, grip between the upper column (#8) /
adjustable column (#13) and loosen the height adjustment locking nut (#14). Extend or lower
the adjustable column to increase or decrease the height of the fan. Once the fan is at a
comfortable height, tighten the height adjustment locking nut (#14).
To convert you fan to a floor fan, please see assembly instructions.
NOTE: The fan must be turned off when performing this adjustment.
SPECIFICATION
MODEL/SKU
LDS33-40PE-RC
VOLTAGE（V）
110-120V, 60Hz
WATTAGE（W）
65W
CAUTION: TO PREVENT ELECTRICAL SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT,
FULLY INSERT.
Loading ...
Loading ...
Loading ...