Loading ...
Loading ...
Loading ...
World Time City Setting
Use the procedure in this section to select a
World Time city. If you are in an area that
observes summer time, you can also
configure a summer time setting.
Note
●
The initial factory default summer time
setting for all cities is [AUTO]. In many
cases, the [AUTO] setting lets you use
the watch without switching between
summer time and standard time.
1. Enter the World Time Mode.
l
Navigating Between Modes
2. Use (D) to display the city you want.
3. To change the summer time setting, hold
down (A) for at least two seconds.
Release the button when [AUTO] starts to
flash.
4. Use (D) to change the summer time
setting.
Each press of (D) cycles through settings
in the sequence shown below.
●
[AUTO]
The watch switches between standard
time and summer time automatically.
●
[OFF]
The watch always indicates standard
time.
●
[ON]
The watch always indicates summer
time.
5. Press (A) to exit the setting screen.
Note
●
While [UTC] is selected as the city, you
will not be able to change or check the
summer time setting.
●
If you select a World Time City with G-
SHOCK Connected and then change
to a different city with a watch
operation, the G-SHOCK Connected
city information is deleted from the
watch.
l
Configuring World Time Settings
Swapping Your Home Time
and World Time
In the World Time mode, press (A) and (B) at
the same time to swap your Home City time
with your World Time.
After swappingBefore swapping
Home Time
World Time
Home Time World Time
Note
●
This function comes in handy when
you need to move to another time
zone. For details about how to use it,
go to the section below.
l
Moving to Another Time Zone
Alarm
The watch will beep when an alarm time is
reached. You can set up to five different
alarms. The hourly time signal causes the
watch to beep every hour on the hour.
●
The alarm sound is muted in the cases
described below.
ー
When battery power is low
ー
When watch is at Level 2 power saving
l
Power Saving Function
Using G-SHOCK Connected
to Configure Alarm Settings
If the watch is paired with a phone, you can
also use G-SHOCK Connected to set alarms.
l
Configuring Watch Settings
Configuring Alarm Settings
1. Enter the Alarm Mode.
l
Navigating Between Modes
2. Press (D) to scroll through alarm numbers
([AL1] to [AL5]) until the alarm you want to
configure is displayed.
Alarm time Alarm number
3. Hold down (A) for at least two seconds.
Release the button when the hours digits
start to flash.
Alarm hour
Watch Operation Guide 5657
17
Loading ...
Loading ...
Loading ...