Loading ...
Loading ...
Loading ...
4
BEFORE USING FOR THE FIRST TIME
• Clip excess cord into the cord storage clips underneath the toaster.
• As with all new heating elements, your toaster may emit a slight burning or ‘new’ smell when it is first switched on.
This is normal and not a cause for concern.
• To eliminate the ‘new’ smell at the first use, operate the toaster on a medium setting without any without any bread
inside. Ensure the room is well ventilated during this operation.
TO USE YOUR TOASTER
• Make sure than the ON levers (B) are at the rest position. Move the browning control dial (D) to the desired setting.
• Connect the appliance to the electrical outlet.
• Insert the slices of bread into the bread toasting slots (A) and lower the lever (B) until it is all the way down.
Note: If the appliance is not connected to the electrical outlet, the lever (B) will not stay down.
• When the toasting is finished, the lever returns to the rest position, raising the toasted bread slices at the same time.
• If the bread is not sufficiently toasted, select a darker degree of toasting by turning the browning control dial (D).
• The toasting can be interrupted at any time by pressing the Stop/Cancel button (I). Never lift the lever (B) to cancel toa-
sting.
Caution: the bread toasting slots become very hot during operation. Do not touch.
Defrost function
Frozen slices of bread may be toasted by pressing the Defrost button (F) immediately after lowering the lever (B); the toast-
ing cycle will be lengthened in order to achieve the desired browning. The defrost indicator light will remain lit while the
defrost function is in use.
Reheat function
To warm toast that has popped up but gone cold, lower the lever (B)
again and then press the ‘Reheat’ button (G). Please note that this is fixed reheat time which cannot be adjusted by the
browning control. The reheat function can be cancelled at any time by pressing the Stop/Cancel button (I). The reheat indica-
tor light will remain lit while the reheat function is in use
Bagel function
The ‘Bagel’ function allows for the toasting of bread, bagels and muffins etc on one side only (internal side), while the other
(external side) remains warm. Bagels and muffins must be sliced in half before toasting. Press down on the lever (B) and
then press the ‘Bagel’ button (H). The bagel indicator light will remain lit while the bagel function is in use.
SUGGESTIONS FOR USE
• Select a lower setting for light browning, for toasting one slice only or for dry bread
• When toasting a single slice of bread, you may notice a variation in toast colour from one side to the other – this is nor-
mal.
• Dry/stale bread toasts more quickly than fresh bread, and thinly sliced bread toasts more quickly than thickly sliced
bread. Therefore the browning control should be set at a lower setting than usual.
• For best results ensure that the bread slices are of an even thickness, freshness and size.
• In order to achieve uniform browning we recommend that you wait a minimum of 30 seconds between each toasting so
that the heating control can reset. Alternatively select a lower setting when additional toasting is carried out.
PRECAUTIONS
• Never use the appliance when it is empty (when there is no bread inside) except on first use.
• Do not use very thin or broken slices of bread.
• Do not insert other foods that may drip during the cooking process. In addition to making the cleaning procedure more
difficult, these may cause fires.
• Clean the crumb tray regularly: crumbs can smoke or burn.
Loading ...