Loading ...
Loading ...
Loading ...
en Cleaning
24
Changing the basic settings
The function selector must be set to the "Off" position.
1. Press and hold the v button for approx. 4 seconds.
The first basic setting will appear on the display,
e.g. ™‚ ‚.
2. Use the A or @ button to change the setting if
necessary.
3. Press the v button to confirm.
The next basic setting will appear on the display.
4. Using the v button, continue going through all the
basic settings as described above, changing the
settings if necessary using the A or @ button.
5. When you have finished, press and hold the
v button again for approx. 4 seconds to confirm the
settings.
All basic settings have now been applied.
You can change the basic settings again at any time.
Note: Following a power failure, the basic factory
settings will be restored.
DCleaning
Cl e a n i n g
With good care and cleaning, your appliance will retain
its appearance and remain fully functioning for a long
time to come. We will explain here how you should
correctly care for and clean your appliance.
Cleaning agents
Damage to the various different surfaces caused by
using the wrong cleaning agent can be avoided by
observing the following instructions.
When cleaning the hob do not use
■ undiluted washing-up liquid or dishwasher detergent,
■ scouring pads,
■ abrasive cleaning agents such as oven cleaner or
stain remover,
■ high-pressure cleaners or steam jets.
■ Do not clean individual parts in the dishwasher.
When cleaning the oven do not use
■ sharp or abrasive cleaning agents,
■ cleaning agent with a high alcohol content,
■ scouring pads,
■ high-pressure cleaners or steam jets.
■ Do not clean individual parts in the dishwasher.
Wash new sponges thoroughly before first use.
:Warning – Risk of burns!
The appliance becomes very hot. Never touch the
interior surfaces of the cooking compartment or the
heating elements. Always allow the appliance to cool
down. Keep children at a safe distance.
Zone Cleaning agent
Stainless steel sur-
faces*
(depending on appli-
ance model)
Hot soapy water:
Clean with a dish cloth and dry with a soft
cloth. On stainless steel surfaces, always wipe
parallel to the natural grain. Otherwise, you
may scratch the surface. Remove patches and
splashes of limescale, grease, starch and albu-
min (e.g. egg white) immediately. Corrosion
can form under such patches and splashes.
Special care products suitable for hot stainless
steel surfaces are available from our after-
sales service and from specialist retailers.
Apply a thin layer of care product with a soft
cloth.
Enamel, painted, plas-
tic and screen-printed
surfaces*
(depending on appli-
ance model)
Hot soapy water:
Clean with a dish cloth and dry with a soft
cloth. Do not use glass cleaner or glass scrap-
ers for cleaning.
Control panel Hot soapy water:
Clean with a dish cloth and dry with a soft
cloth. Do not use glass cleaner or glass scrap-
ers for cleaning.
* Optional (available for some appliances, depending on the appliance
model)
Loading ...
Loading ...
Loading ...