Loading ...
Loading ...
Loading ...
57
BEFORE YOU CALL
Loading ...
- Table of contents
- Questions?
- Product Record and Registration
- Important Safety Instructions
- Cooking Recommendations
- Using Proper Cookware
- Cookware Material Types
- Element On and Hot Surface Indicator Lights
- Types of ceramic cooktop elements
- Before Setting Surface Controls
- Single radiant surface elements (all models)
- 1. Place correctly sized cookware on surface element.
- 2. Push in and turn the surface control knob in either direction (Figure 7) to the desired setting (refer to the “Suggested radiant surface element settings” in Table 1).
- 3. When cooking is complete, turn the radiant surface element OFF before removing the cookware.
- Suggested radiant surface element settings
- Dual radiant surface elements (some models)
- 1. Place correctly sized cookware on the surface element.
- 2. Push in and turn the surface control knob clockwise to begin heating both the inner and outer elements. If only the inner element is needed for smaller cookware, push in and turn the knob counter-clockwise (see Figure 8).
- 3. When cooking is complete, turn the knob to OFF before removing the cookware.
- Figure 8: Dual element knob settings
- Triple Surface Radiant Element (some models)
- 1. Place correctly sized cookware on the triple surface element.
- 2. Push in and turn the control knob to the inner element symbol for smaller cookware or to the inner and middle element symbol for average cookware or to the inner, middle, and outer element symbol for large cookware (Figure 9). Turn the knob to adj...
- 3. When cooking has completed, turn the surface control knob to OFF before removing the cookware.
- Figure 9: Triple element knob settings
- Bridge Radiant Element (some models)
- 1. Place correctly sized cookware (griddle) on the cooktop with the bridge element under the middle.
- 2. Push in and turn the control knob to the circular element symbol for regular cookware or to element and bridge symbol for extended cookware designed for use on multiple elements (see Figure 10).
- 3. Allow the griddle to heat for a few minutes when cooking items that require a preheated surface such as pancakes and eggs. The two elements will work together with the bridge element to provide even heating.
- 4. When cooking has completed, turn the surface control knob to OFF before removing the cookware.
- Notes
- Using the bridge element with a griddle (some models)
- Keep warm (some models)
- 1. Push in the knob and turn in either direction (see Figure 12). The temperatures are designated by hi and lo. However, the control can be set at any position between hi and lo for different levels of warming.
- 2. When ready to serve, turn the control to OFF. The hot surface indicator light will remain on until the warm zone cools.
- Figure 12: Keep warm knob
- Table 2: Recommended keep warm zone settings
- Home Canning
- Single radiant surface elements (all models)
- Setting Surface Controls
- Oven Vent Location
- Types of oven racks
- Removing, replacing, and arranging flat or offset oven racks
- Before Setting Oven Controls
- Oven Control Features
- 1. Bake - Use to select bake feature.
- 2. Conv - Use to set convection bake, convection roast, or convection broil.
- 3. Broil - Use to set Broil feature.
- 4. Steam Clean - The Steam Clean feature offers a time saving method for cleaning light soils.
- 5. Self Clean - Use with arrow keys to set self-clean cycle of 2, 3, or 4hrs.
- 6. Quick Preheat - Use to preheat oven before baking.
- 7. Oven Light - Use to turn on internal light. Will turn on when the oven door is open.
- 8. Oven Lock - Use to lock out oven controls.
- 9. Timer on-off - Use to set or cancel the minute timer. The minute timer does not start or stop any cooking function.
- 10. Probe - Use to set and adjust temperatures when using probe.
- 11. Keep Warm - Use to keep cooked foods at serving temperature.
- 12. Convect Convert - Use to change standard bake recipe to a convection bake recipe.
- 13. Set Clock - Use set the time of day
- 14. Delay Start - Add to quick preheat, bake, Conv (bake, roast, and broil), Convect Convert and Self Clean to program a Delay Start.
- 15. Bake Time - Use to set length of baking time desired.
- 16. Add A Min -Use to add additional minutes to the timer.
- 17. OFF - Use to clear any feature except the time of day and minute timer.
- 18. 0 through 9 keys - Use to set temperature and time.
- 19. START - Use to start most oven features..
- Setting the Clock
- Setting 12 Hour or 24 Hour display mode
- Setting Timer
- Add a Min
- Changing between continuous bake setting or 6 hour energy saving
- Changing temperature display from Fahrenheit to Celsius
- Setting Silent or Audible Control mode
- Setting Oven Lockout
- 1. Be sure oven door is completely closed.
- 2. Press and hold the lock key for 3 seconds. The motor driven door latch mechanism will begin locking the oven door automatically. Do not open the oven door. Allow about 15 seconds for the oven door to completely lock. Once door is locked, the word ...
- 1. Press and hold the lock key for 3 seconds. The motor door latch will begin unlocking the oven door automatically. Do not open the oven door. Allow about 15 seconds for the oven door to completely unlock.
- 2. When the word DOOR with a lock icon no longer displays, the oven door may be opened, and the oven control keypad will be available for use.
- Operating Oven Lights
- Quick Preheat
- Quick Preheat is available for single rack baking with packaged and convenience foods and can be programmed for temperatures between 170°F and 550°F. Follow the recipe or package directions for food preparation time and temperature. When quick preh...
- 1. Arrange the interior oven racks.
- 2. Press Quick Preheat. 350 will appear in the display.
- 3. Press START.
- 4. 350 and PREHEAT will be displayed while the oven is preheating.
- 5. Press OFF when baking is complete or to cancel the preheat feature.
- 1. Press Quick Preheat. 350 will appear in the display.
- 2. Enter the new preheat temperature. Press 4 2 5.
- 3. Press START. 425 will show in the display.
- 4. When baking is complete, press OFF.
- Figure 20: Single rack baking for convenience foods
- Figure 21: Oven rack position (4) best for cooking convenience foods
- Setting Bake
- Convection Bake
- Setting Convection Convert
- Figure 25: Check Food reminder shown in display.
- 1. Press Conv key once for convection bake.
- 2. Press START.
- 3. Press Convect Convert.
- 4. To cancel convection convert at any time, press OFF.
- 1. Press Conv key once for convection bake.
- 2. Press START.
- 3. Press Bake Time.
- 4. Enter 3 0 using numeric keypad.
- 5. Press START.
- 6. Press Convect Convert.
- 7. To cancel Convection Convert at any time, press OFF.
- 1. Arrange interior oven racks.
- 2. Press Conv. Conv and bake will flash and 350 will appear in the display.
- 3. Press 4 0 0. Conv and bake will keep flashing and 400° will appear in the display.
- 4. Press START.
- 5. Set Bake Time or Delay Start if needed. For Delay Start or Bake Time instructions, see page 30.
- 6. Press Conv Convert, and the oven temperature displayed will be 25°F lower than the original set temperature of 400°F. The actual oven temperature and the fan icon will be displayed. A beep will sound once the oven temperature reaches 375°F.
- 7. Place food in the oven.
- Figure 25: Check Food reminder shown in display.
- Setting Bake Time
- Setting Delay Start
- Setting Broil
- 1. Arrange the oven racks when cool. For optimum browning results, preheat oven for 5 minutes before adding food.
- 2. Press broil.
- 3. Position bakeware in oven.
- 4. Press START. To adjust the broil temperature, press broil again and then enter the new temperature using the number keys. Press START.
- 5. Leave door open to broil stop position. Broil on one side until food is browned; turn an broil other side until done to your satisfaction.
- 6. When finished broiling, press OFF.
- Figure 27: Broil pan and insert (L) Rack positions (R)
- Convection Broil (some models)
- 7th**
- 550°F (288°C)
- 5
- 4
- 140ºF (60ºC)
- Rare*
- 6th or7th**
- 550°F (288°C)
- 6
- 4
- 145ºF (63ºC)
- Medium
- 6th or 7th**
- 550°F (288°C)
- 8
- 7
- 170°F (77ºC)
- Well
- 6th
- 550°F (288°C)
- 12
- 10
- 170°F (77ºC)
- Well
- 5th
- 450°F (232°C)
- 20
- 10
- 170°F (77ºC)
- Well
- 6th
- 450°F (232°C)
- 8
- 6
- 170°F (77ºC)
- Well
- 6th
- 550°F (288°C)
- as directed
- as directed
- 170°F (77ºC)
- Well
- 5th
- 550°F (288°C)
- 170°F (77ºC)
- Well
- 7th**
- 550°F (288°C)
- 9
- 7
- 145ºF (63ºC)
- Medium
- 6th
- 550°F (288°C)
- 10
- 8
- 170°F (77ºC)
- Well
- Convection Roast
- 1. Place oven rack on 1, 2, or 3 rack position.
- 2. Place the meat on the broiler pan and insert.
- 3. Make sure the insert is securely seated on top of the broiler pan. Do not use the broiler pan without the insert.
- 4. Place meat (fat side up) on insert
- 5. Place prepared food on oven rack and slide into oven.
- 6. Close the door.
- 7. Press the Conv key twice. Roast will appear in the display.
- 8. Press START.
- 9. When cooking is completed or to cancel convection roast press OFF.
- Figure 30: Convection roasting on lower oven racks
- Table 3: Convection roasting temperature and time recommendations
- Convection Roast
- 4 to 6 lb.
- 350°F (177ºC)
- *160ºF (71ºC)
- 25-30
- 4 to 6 lb.
- 350°F (177ºC)
- *160ºF (71ºC)
- 25-30
- 2 to 3 lb.
- 400°F (204ºC)
- *160ºF (71ºC)
- 15-25
- 12 to 16 lb.
- 325°F (163ºC)
- 180°F (82ºC)
- 8-10
- 16 to 20 lb
- 325°F (163ºC)
- 180°F (82ºC)
- 10-15
- 20 to 24 lb.
- 325°F (163ºC)
- 180°F (82ºC)
- 12-16
- 3 to 4 lb.
- 350°F-375°F (177ºC-191ºC)*
- 180°F (82ºC)
- 12-16
- 4 to 6 lb.
- 325°F (163ºC)
- 160°F (71ºC)
- 30-40
- 4 to 6 lb.
- 325°F (163ºC)
- 160°F (71ºC)
- 20-30
- 3 to 4 lb.
- 325°F (163ºC)
- 160°F (71ºC)
- 20-25
- 5 to 7 lb.
- 325°F (163ºC)
- 160°F (71ºC)
- 30-40
- Cooking with Meat Probe
- Figure 31: Using the probe
- Figure 32: Probe in thickest area of food
- Figure 33: Probe in thickest part of breast
- 1. Insert the probe into the food. Place prepared food on the desired oven rack position and slide into the oven.
- 2. Plug the connector end of the probe all the way into the probe receptacle while the oven is still cool. The receptacle is located on the upper left front oven cavity wall (See Figure 31).
- 3. When the probe is set, an acceptance tone will sound, the probe icon will illuminate, and the actual probe temperature appears in the display (See Figure 34). Close the oven door.
- Figure 34: Probe set showing probe temperature
- 4. Press probe key once. Enter the desired target food temperature using the numeric keys and set temperature for food type.
- 5. Press START to accept the target temperature.
- 6. Set for Quick Preheat, Bake, convection bake, or convection roast and if necessary adjust the oven temperature accordingly.
- 7. The control will provide three beeps when the internal target temperature is reached.
- 8. The oven will automatically change to a Keep Warm setting and the actual probe temperature will remain in the display. Keep Warm will maintain the oven temperature at 170°F (77°C) for 3 hours unless otherwise cancelled.
- 9. To stop cooking at any time, press OFF.
- Table 4: USDA recommended minimum internal cooking temperatures
- Cooking with Meat Probe
- 160°F (71°C)
- 165°F (74°C)
- 145°F (63°C)
- 160°F (71°C)
- 170°F (77°C)
- 165°F (74°C)
- 165°F (74°C)
- 165°F (74°C)
- 165°F (74°C)
- 160°F (71°C)
- 140°F (60°C
- 160°F (71°C)
- 165°F (74°C)
- 1. Press probe key and hold for 6 seconds.
- 2. Press Self Clean key and toggle until Continu: appears, as shown in Figure 35, then press START to accept.
- Figure 35: Probe set to continue cooking
- Figure 36: Probe set to cancel cooking
- Keep Warm
- 1. If needed, arrange oven racks and place cooked food in oven.
- 2. Press Keep Warm: KEEP WARM will appear in the display. (If no other keys are touched within 25 seconds the request for keep warm will clear.)
- 3. Press START. Keep Warm will automatically turn on and then turn off after 3 hours unless cancelled.
- 1. Press Bake Time.
- 2. Enter 45 using numeric keypad.
- 3. Press START.
- 4. Press Bake and enter 425 on numeric keypad.
- 5. Press START to accept.
- 6. Press Keep Warm. KEEP WARM will appear in the display.
- 7. Press START. When the bake time is over, Keep Warm will automatically turn ON. The Keep Warm function will automatically turn OFF after 3 hours.
- Setting the Sabbath Feature (for use on the Jewish Sabbath and Holidays)
- 1. Be sure the clock is set with the correct time of day.
- 2. Arrange oven racks, place bakeware in oven, and close oven door. Press Bake.
- 3. Press START.
- 4. Note: If a Bake Time or Delay Start are desired enter the times at this point. See “Setting Bake Time” and “Setting Delay Start” on page 30 for detailed instructions.
- 5. Press and hold Bake Time and Delay Start simultaneously for about 3 seconds to set the Sabbath feature. Once the feature is set, SAb will appear in the display indicating the oven is properly set for the Sabbath feature (Figure 37).
- Figure 37: Oven set for Sabbath baking
- Figure 38: Display showing Sabbath failure
- Setting Warmer Drawer (some models)
- Warmer drawer recommended food settings
- Figure 41: Warmer drawer thermostat control knob
- 1. Open warmer drawer when cool and arrange warmer drawer rack as needed.
- 2. For best results, close the warmer drawer and preheat the drawer before adding food items. An empty warmer drawer will fully preheat in approximately 15 minutes.
- 3. Push in and turn the warmer drawer control knob in either direction to the desired heat setting and release
- 4. Only hot food that has already reached serving temperature should be placed in the warmer drawer. Position on rack and close warmer drawer. Dinner plates may be warmed also.
- 5. When finished, turn the warmer drawer heat setting knob to OFF position. Carefully remove items and close warmer drawer.
- Figure 41: Warmer drawer thermostat control knob
- Restoring Factory Default Settings
- Adjusting Oven Temperatures
- Self Clean
- Setting Self Clean
- 1. Be sure the oven is empty and all oven racks are removed. Remove all items from the oven. Be sure oven door is completely closed.
- 2. Press Self Clean and the default 3 hour clean time will appear in the display. You may accept the default 3 hour clean time or choose a different clean time by pressing the Self Clean key to toggle between 2, 3, and 4 hours clean time. Once you ha...
- 3. Press START to activate self clean.
- 1. CLEAN message will turn off, and Hot will appear in display window.
- 2. Once the oven has cooled down (about 1 hour) and Hot is no longer displayed, the oven door may be opened.
- 3. When the oven interior has completely cooled, wipe away any residue or powdered ash with a damp cloth or paper towel.
- Setting Delay Start Self Clean
- 1. Be sure the clock is set with the correct time of day, the oven is empty, and all oven racks are removed. Be sure oven door is completely closed.
- 2. Press Delay Start.
- 3. Using numeric keypad, enter 9 0 0.
- 4. Press START to accept
- 5. Press Self Clean.
- 6. Press START.
- 1. Press OFF.
- 2. If self clean has heated the oven to a high temperature, allow enough time for the oven to cool.
- 3. Before restarting self clean, be sure to read important notes below.
- Steam Clean
- 1. Remove all racks and oven accessories.
- 2. Scrape or wipe loose debris and grease from the oven bottom.
- 3. Pour 1 cup of tap water onto the oven bottom. (Figure 43) Close oven door.
- Figure 43: Add 1 cup of tap water
- 4. Press Steam Clean.
- 5. Press START. St Cn will appear in the display.
- 6. The time remaining in the Steam Clean cycle is shown in the display. Do not open the door during this time. If door is open while in Steam Clean (d-O) will appear in the display.
- 7. When the steam clean cycle is complete an alert will sound and the END message will show in the display. Press off to return to the clock.
- 8. Take care opening the door when the steam clean is finished. Stand to the side of the oven out of the way of escaping vapor.
- 9. Wipe oven cavity and bottom. Do not clean oven door gasket (Figure 44). Avoid leaning or resting on the oven door glass while cleaning cavity.
- 10. To cancel Steam Clean at any time press OFF.
- Figure 44: Clean around the oven door gasket
- Oven Control Features
- Setting Oven Controls
- Figure 45: Use cleaners with caution
- Cooktop Maintenance
- Cooktop Cleaning
- Cleaning under bake element (some models)
- Removing and Replacing the Oven Door
- 1. Open oven door completely, horizontal with floor (See Figure 49).
- 2. Pull the door hinge locks on both left and right door hinges down from the oven frame completely towards the oven door (See Figure 50). A tool such as a small flat-blade screwdriver may be required.
- 3. Firmly grasp both sides of oven door along the door sides. Do not use the oven door handle (See Figure 51).
- 4. Close the door to approximately 10 degrees from the door frame (See Figure 51).
- 5. Lift the oven door hinge arms over the roller pins located on each side of the oven frame (See Figure 52).
- 1. Firmly grasp both sides of oven door along the door sides. Do not use the oven door handle (See Figure 51).
- 2. Holding the oven door at the same angle as the removal position, seat the hook of the hinge arm over the roller pins located on each side of the oven door frame (See Figure 51 and Figure 52). The hook of the hinge arms must be fully seated onto th...
- 3. Fully open the oven door, horizontal with floor (See Figure 49).
- 4. Push the door hinge locks up towards and into the oven frame on both left and right oven door hinges to the locked position (See Figure 50).
- 5. Close the oven door.
- Figure 49: Door hinge location
- Figure 50: Door hinge locks
- Figure 51: Holding door for removal
- Figure 52: Replacement and location of hinge arm and roller pin
- Replacing the Oven Light
- 1. Turn electrical power off at the main source or unplug the appliance.
- 2. Remove the interior oven light shield after removing the wire holder by carefully moving the wire to the side of the glass shield. The tension from the wire holds the glass shield in place.
- 3. Pull the shield straight out. Do not twist or turn.
- 4. Replace the bulb with a new appliance bulb.
- 5. Replace the glass oven light shield. Replace wire holder.
- 6. Turn the power back on again at the main source (or plug the appliance back in).
- 7. Be sure to reset the time of day on the clock.
- Figure 53: Oven light protected by glass shield
- Remove and replace storage drawer (some models)
- 1. Pull empty drawer out until it stops.
- 2. Tilt up the front of the drawer up and pull it out over the glide stop.
- 1. Insert the back of the drawer into the opening.
- 2. Lift up the drawer and line up the drawer supports with the rails. Make sure to clear the glide stop.
- 3. Push in the drawer until it stops.
- Figure 54: Parts of storage drawer
- Care and Cleaning
- Before You Call
- Warranty
- Page 57/58 Page 1Page 2Page 3Page 4Page 5Page 6Page 7Page 8Page 9Page 10Page 11Page 12Page 13Page 14Page 15Page 16Page 17Page 18Page 19Page 20Page 21Page 22Page 23Page 24Page 25Page 26Page 27Page 28Page 29Page 30Page 31Page 32Page 33Page 34Page 35Page 36Page 37Page 38Page 39Page 40Page 41Page 42Page 43Page 44Page 45Page 46Page 47Page 48Page 49Page 50Page 51Page 52Page 53Page 54Page 55Page 56Page 57Page 58
- Contents
- Table of Contents
- Search
- Previous
- Next
- Troubleshooting
- Bookmarks